Non material amendments to relocate access point and double gates to garage workshop following Non Material Amendment DM/22/02058/NMA and realignment of 2.0m high timber acoustic fence to boundary of garage workshop adjacent to new adopted highway.

Non material amendment to application 21/P/0300/FUH (Proposed erection of a detached garage/workshop to front of property; erection of fence and gates to the front boundary.) to allow for a change of material finish to the rear elevation from render to brick.

NON-MATERIAL AMENDMENT TO PLANNING PERMISSION 22/01031/F: Proposed single storey rear extension, internal conversion of the attached garage to provide habitable accommodation, internal reconfiguration with amendments to foul and surface water drainage with associated walls and fences

Amendment to increase size of windows in dormer, replace all existing and new windows with antracite grey and move window in shower room on 1st floor pursuant to 22/01483/HOU Erection of a part single part two storey extension to one side, single storey extension to other side, fencing and gate, conversion of garage to habitable accommodation, insertion of two rooflights to front and two dormer windows to rear to facilitate the conversion of the loft to habitable accommodation, removal of shed, extension to hardstanding, alterations to front door and doors and windows to ground floor rear

Non material amendment to application 21/P/3360/FUL (Demolition of existing bungalow and erection of a two storey dwelling with balcony to rear of house and solar panels on roof. Carport and attached garage. New boundary fences and wall with double gates to entrance.) to allow for all windows (excluding Velux windows) to be changed to Anthracite UPVC flush casement, bedroom 4 window size to be changed from size 1150mm X 1530mm to 1530mm X 1350mm, dressing room window to be changed from size 1125mm X 1530mm to 1530mm X 1350mm and Front porch Velux windows X3 MK12 780mm X 1800mm. to be changed for Velux windows X3. MK10. 780mm X 1600mm.

Non material amendment to planning permission PL/18/3306/FA (Demolition of existing dwelling, erection of new dwelling, detached garage, front gates and fence) to allow for changes to windows and the erection of a canopy at the front of the house to protect the main entry door.

Variation of Condition 03 of planning approval 17/00491/HOUSE dated 23.06.2017 to allow the garage/storage building to be built 1.2m from the boundary fence (retrospective application)

Two storey side and single storey rear extension to dwelling house (garage, utility room, 2 bedrooms and enlargement of family area) together with installation of rear dormer and juliet balcony in connection with formation of rooms in roof space (bedroom and ensuite) and erection of boundary wall/fence - Non material amendment to previously approved application code No. 20/01377/FUL to amend the approved plans to increase the depth of the rear extension and amend the roof design

Non material amendment to approved application 20/01000/FUL dated 08.10.2021 (residential development for 114no. dwellings and associated works) [as amended by 20/01000/NMC01 which revised siting of Plots 22 and 94, siting of garage for Plot 8, alterations to the garages to provide double skin walls and omit personal doors, and alterations to the ground floor openings of the Infinity House Type (plots 90-93)] to permit revised height to boundary fence between plots 23 and 79 and amendments to the boundary to plots 4 and 59 together with amendment to conditions 2, 33, 34, 37, 38 and 39 to insert the revised plan(s).

Non material amendment to application 22/00635/FUL (Variation to condition 2 and 4 of application 18/00225/FUL (Change of use of existing studio and garage to form a self contained living unit and replace garage doors with windows and front door, construct single garage) variation to condition 2 - so that it reads "The development hereby permitted shall be carried out in accordance with drawings 9383-102-00, 200-A, and 201-A and specifications", and to condition 4 so that it reads - "The existing railings at 1.1 metres in height to the front of the property and the boundary fence, wall and gate at up to 2.1m in height between number 100 Vaughan Williams Way and the self-contained dwelling unit shall both be permanently retained and maintained in the positions indicated on drawing 9303-100-00 dated April 2022.") to revise the proposed boundary again, by moving the vehicle access gate further into the curtilage of the host dwelling.