Felling 3 Dead Trees (T19i, T22i & T42i) - 5 day notice. Proposed removal of Sycamore T42i. The tree is suffering severe crown die back presumed to be a result of the particularly dry spring and early summer months (refer to photograph 1). The extent of die back has left the tree susceptible to crown failure, compromising public safety and the owners duty of care. It is proposed to replace the tree a maximum of 2m from position of T42i with 1No . Field Maple - Acer campestre at standard tree form 8-10cm girth. Proposed removal of tree group G45i. These pole type trees are growing very close to rear corner of dwelling at plot 5 to such an extent the routeing of drains and the necessary building up of ground levels will compromise the trees retention (refer to photograph 2). The 3 items are not shown for retention on the approved plans and it appears were mistakenly omitted from the initial site clearance work. No replacement planting considered necessary due to abundant adjoining tree cover and proximity to dwelling under construction. Proposed removal of Sycamore T119i. The tree is suffering severe crown die back presumed to be a result of the particularly dry spring and early summer months (refer to photograph 3). The extent of die back leaves the tree susceptible to crown failure compromising public safety and the owners duty of care. It is proposed to replace the tree a maximum of 2m from position of T119i with 1No . Field Maple - Acer campestre at standard tree form 8-10cm girth. Removal of Pine T122i. The tree is dead due to longstanding suppression/overcrowding (refer to photograph 4). No replacement planting considered necessary due to abundant adjoining tree cover. If the Tree Officer is amenable it would be helpful to meet on site to resolve any issues that may arise due to the timescales proposed.

T1 Corsican pine (referred to as T3 in AIA)- Excavations within the RPA of T1 to facilitate installation of below ground utilities, construction of footpath using 3D cellular confinement systems within RPA of T1, ajacent to new dwelling. Reason: To limit and prevent distubance/damage during phases of construction and development.

Pine (T1) - Trim back secondary branches upper canopy to facilitate construction of new dwelling. Pine (T2) - Trim back secondary branches and remove 1 lateral 9m up. Small Oak (T3) - Remove one lo...

TPO/2004/0653:- T2 Oak - Reduce height and length of longest lateral branches by up to 2 metres on east, south and west sides, leaving north [recently pruned] side intact. The remaining crown to be pruned in proportion to the longest laterals, to leave a natural shape. Residual dimensions to be east - 5m, south - 4m, west - 5m. Reason: The subject tree now dominates the rear garden of the property, and the works are designed to improve this relationship and balance the tree visually, following permitted works to enable construction of the dwelling next door.