T1Cupressus macrocarpa - crown reduction by 1 - 1.5m to a final height of 9.5m and spread to 6m. T2 Cupressus macrocarpa - prune back the lower and mid canopy, up to a height of 6m above ground level on the southern sector of the crown, by up to 1m. T3 Horse chestnut - prune to give up to 1.5m clearance over the shed and carefully sever ivy at the base of the tree. T4 Maple - branch lift to give up to 4m clearance directly over the neighbours driveway at 12 Illingworth. T5 Silver Birch - branch lift to give up to 4m clearance directly over the driveway. T6 Leyland cypress - fell. S1 - Portuguese Laurel (1 Brudenell) - Cut back to hedge line (005/1960/TPO).

T1 Hornbeam Crown Lift to provide 4m clearance from ground level, G1 Hornbeam Crown Lift to provide 2.5m clearance from shed roof, T2 Oak Crown Reduction - Reducing the height and spread of the tree by up to 2-3m, T3 Oak Crown Reduction - Reducing the height and spread of the tree by up to 2m and remove deadwood, T4 Silver birch Crown Reduction - Reducing the height and spread of the tree by up to 2m, Works to maintain trees size, and to increase light into the woodland understory. (TPO1/1971)

G1- 2x Crab Apple- reduce in height and width by 1.5 meters, crown lift over shed by removing 1 meter. T2- Prunus- reduce and shape by removing 1 meter. To maintain these trees in their current location.

T1 - Removal of 2 Damson trees to hedge height as both trees are severely leaning over neighbours path (4 Main Street). T2 - 1 Ash tree - reduction of tree to below overhanging branch as tree grows sideways/down over neighbours shed. T3 - 1 Ash tree (3 trunks) - crown reduction back to main trunks T4 - 3 Ash trees - crown reduction (roughly 33%) to reduce height and encourage shape T5 - 1 Ash tree - crown lift to reduce weight in tree canopy T6 - 1 Ash tree - remove tree as conflicting with main ash tree next to it T7 - 1 Ash tree - crown lift (roughly 25-33%) Works to be carried out by DTC Forestry Ltd

Works to oak tree covered by LBE ORDER NO 66 1977:- crown thin by 20%, lift crown to 4m from ground level without removing any scaffold limbs and reduce low extraneous lateral growth towards the neighbouring gardens shed and fence line by up to 1.5m if required to balance the crown lift.

Remove a dead hawthorn tree that partially collapsed into nearby trees and is overhanging the rear garden of 5 Briar Mead. In addition clear over hanging branches up to 2.5 metres from ground level that are overhanging the fence line to allow the installation of a new boundary fence and to protect the roof of the garden shed that sits underneath the trees as the felt is being ripped and damaged.

T1 Beech- Crown Reduction 20%, remove overhanging branches from the garage and shed, and cut branches over the lawn by up to 10ft.

T1, Beech: reduce radial spread over the office by approx 3m; reducing over extended growth to allow more light into office and reduce risk of failure onto building. T2, Turkey Oak: reduce radially by up to 2m.; crown lift to 3.5m to allow grass maintenance by crown lifting; reduction to reduce over extended growth. T3, Turkey Oak: remove deadwood and crown lift by 3.5m. To allow grass maintenance by crown lifting. T4, Turkey Oak: remove deadwood; crown lift by 3.5m amd reduce radial spread over the shed; and, crown section over the drive by 2m lifting over the lawn to allow grass maintenance; radial reductions to reduce over extended growth.

Trees T1, T3, T4 & T5 - Crown Lift to achieve a maximum clearance over the garden area and/or parking spaces of 3metres between the branch tips and the surrounding surface. No pruning wounds greater than 80mm in diameter to be generated as a result of the works. Crown Reduce tree canopies on the adjacent building sides only to achieve a maximum clearance of 2metres between the branch tips and the adjacent building structure. No pruning wounds greater than 80mm in diameter to be generated as a result of the works. Additional - Tree T1 Silver Pendant Lime - Prune back branches to create 2m of clearance from the telecoms cables. Tree T2 Silver Pendant Lime - Crown lift to a height of 3m to provide clearance over the car parking area. Tree T3 Copper Beech - Remove broken branch from lower crown. Tree T6 Copper Beech - Crown lift over the stable building and shed to provide 2m of clearance between the branch tips and the adjacent building structure - No pruning wounds greater than 80mm in diameter to be generated as a result of the works.

Cut back branches from two trees that overhang garden and shed.