Redevelopment of the site to create the Hillingdon Watersports Facility and Activity Centre including demolition of existing Broadwater Lake Sailing Club (BSC) clubhouse at the north of the lake and erection of a building to be occupied by HOAC and BSC including changing facilities, meeting rooms, storage, Workshop and seasonal worker accommodation (sui generis), activity shelters; installation of pontoons and concrete slipways; boat shed; equipment storage huts (north of lake and at entrance); boat parking and racking areas; camping area; outdoor activity areas; ecological enhancement throughout the site; new pedestrian routes through the peninsula; landscaping including new woodland, dense vegetation screens and boundary treatment; new access and access road; localised dredging and land reclamation; relocation of existing sailing area and creation of floating and fixed islands within the lake; coach drop off and turning area; vehicle parking; cycle parking; and associated works. Hillingdon Council - application number 2382/APP/2023/2906

S19 to vary condition 2 (Approved plans) of listed building consent 23/02281/LBC (Unification of Nos 4 and 6 Church Way into one single dwelling together with internal alterations, replacement of external chimney stack flashing with lead flashing. External works to remove boundary fence between No 4 and 6, removal of dilapidated sheds and erection of new single shed) to increase area of removed/replaced tile floor from just the Bathroom in No 6 to also include the adjacent Entrance Hall.

Application for the approval of details reserved by conditions no. 3 (Details of materials/samples to be submitted), no. 4 (Construction Environmental Management Plan [CEMP]), no. 5 (Boundary Treatments), no. 6 (Soft and Hard Landscaping Scheme), no. 7 (Arboricultural Method Statement), no. 8 (Surface Water Drainage), no. 10 (Submission of Highways Details) and no. 14 (Details of Sheds) of planning permission ref. 23/00263/CV (Application for the variation of condition nos. 2 (plans) of plann...

Varation of Condition 1 'Approved Plans' pursuant to planning permission ref no. 23/AP/1461 for the construction of a rear dormer roof extension to the main roof slope and over outrigger; including the raising of the roof ridge by 1.1.m and the contruction of a garden shed. Variation: Increase height of the boundary wall.

Erection of a rear raised patio area with associated steps. Associated boundary fencing / walls incorporating a walled and roofed structure (shed) and a canopy enclosure on the rear patio. Provision of a swimming pool. (Retrospective). Proposed installation of balustrade and clear glass screening to swimming pool

Details of Condition 4. Tree protection as required by planning permission 22/AP/2987 dated 25/11/2022 for construction of a single storey rear extension with integrated canopy. Demolition of the existing shed and construction of a new shed building and bike store to the side. Facade alterations to replace the existing windows and cladding. Renovation of the existing porch/garage to include a new roof, cladding and glazing. Installation of two rooflights to the rear roof slope. Boundary alterations to continue the existing hit and miss brick wall. Excavation works to create a lower patio level linking the new shed building to the main house and minor landscaping works to reform the front and rear gardens.

The client is currently refurbing their garden area with plans to build an office space to the rear of the garden by items G5 & T4 so are aiming to clear the surrounding vegetation for the works. Item T3 is situated between 2 garden sheds and is starting to get too large for its location with the client growing increasingly concerned on branches/limbs falling and causing damage. The remaining items (T2 And G1) are to create a more open garden space. There are various other trees and shrubs growing up the boundary lines within the garden so the suggested works would have little impact on the amenity value of the garden and surrounding area.

T1 - Marsh Cypress - 10% crown reduction in rear garden. My landscaping contractor told me in January 2015 that CCC had consented to the removal of this tree and grinding out its stump. He told me that a CCC conservation officer with responsibility for archaeology had also visited the site, and had no objection to this proposal. Having obtained further expert advice, from a local tree specialist, I decided it would be far preferable to retain the tree. However, this would be possible only if I could obtain consent for a 10% crown reduction each year, to ensure no further increase in its spread and the extent of its root growth. This was necessary to meet insurance requirements, the tree being close to the long boundary wall, the river embankment, and the dwelling itself, all of which are listed Grade II. The crown reduction having been approved in advance on each occasion to date, the work has been carried out January/February every year. The tree has continued to grow vigorously, is well-shaped, and remains suitable in size for its environment. I now seek consent for a 10% crown reduction, to be carried out by the same local specialist. The work proposed would be done during January or February 2024, when the tree will have shed its foliage and become dormant.

Submission of material information pursuant to condition 3 of permission 22/01731/HHOLD. Construction of new single storey rear flat roof extension, single storey pitch roof side extension, two storey front infill gable extension to main house, along with alterations to fenestration, construction of a new chimney, installation of rooflights and solar panels, and overcladding existing retained walls with brick and flint. Alterations to external hard and soft landscaping, construction of new brick and flint boundary walls, demolition of existing sheds, and alterations to existing garage. As amended on 22/06/2023, 23/06/2023,18/07/2023, 11/09/2023 and on 20/09/2023.

T1. Bay rear garden RHS - Crown Reduction. Reducing the height and spread of the tree by up to 5 metres and remove major deadwood greater than 25mm in diameter. Reduce encroachment into neighbours to boundary line. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 14x10m down to 9x5m Dieback in upper crown T2. Variegated Holly rear garden RHS - Crown Lift to provide 3 metres clearance from ground level and clip round to shape and tidy, removing up to half a metres growth 10x6m. Works to clear pathway.T3. Beech x 2 rear garden RHS - Crown Reduction. Reducing the height and spread of the tree by up to 3 metres and remove major deadwood greater than 25mm in diameter. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 18x12 down to 15x9m Tight included compression fork at 3m. Works to alleviate stress on weak union.T4. Holm Oak x 3 rear boundary - Crown Lift to provide 3 metres clearance from ground level 9x7m. Works to allow light under trees.T5. Yew rear garden LHS - Crown Reduction. Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 10x9m down to 8x7m. Works to reshape tree following the failure of an adjacent tree and to clear neighbours shed and boundary wall.T6. Leyland Cypress rear garden LHS - Reduce height by approximately 3 metres and shape laterally as required 16x10 down to 13x8m. Works to allow light to rear of property.