Submission of details to comply with condition 4 (tree protection) attached to planning permission 23/0665/FFU for the erection and relocation of stables and tack room following demolition of existing, for private equestrian use.

1 Lime rear boundary RHS Re-Pollard back to previous pollard points at 6 metres from ground level, removing approximately 8 metres regrowth 14x6m down to 6x2m works to alleviate stress on old decaying pollard points 2 Chestnut rear boundary Re-Pollard back to previous pollard points at 6 metres from ground level, removing approximately 5 metres regrowth 11x6m down to 5x2m works to alleviate stress on old decaying pollard points 3 Beech rear garden LHS Multiple crossing stems and weak included union on main stem at approximately 4 metres. Crown Reduction - Reducing the height and spread of the tree by up to 2.5 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 12x9m down to 9.5x6.5m(reasons are within the spec)

Beech (overhanging neighbours at 9 Fenton Rd) Reduce the height and spread of the tree by up to 2m and thin canopy by removing established epicormic growth. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Written consent from the neighbour is required before works commence. Reason: Good arboricultural practice to maintain reduced trees. The crown thinning element will remove the potential for future crossing and rubbing branches. Pre works 15x14m, Post works 13x12m

Fell Sycamore TPO 140 T1 and plant replacement tree 20m away from Rectory Stables.

T1. Bay rear garden RHS - Crown Reduction. Reducing the height and spread of the tree by up to 5 metres and remove major deadwood greater than 25mm in diameter. Reduce encroachment into neighbours to boundary line. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 14x10m down to 9x5m Dieback in upper crown T2. Variegated Holly rear garden RHS - Crown Lift to provide 3 metres clearance from ground level and clip round to shape and tidy, removing up to half a metres growth 10x6m. Works to clear pathway.T3. Beech x 2 rear garden RHS - Crown Reduction. Reducing the height and spread of the tree by up to 3 metres and remove major deadwood greater than 25mm in diameter. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 18x12 down to 15x9m Tight included compression fork at 3m. Works to alleviate stress on weak union.T4. Holm Oak x 3 rear boundary - Crown Lift to provide 3 metres clearance from ground level 9x7m. Works to allow light under trees.T5. Yew rear garden LHS - Crown Reduction. Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 10x9m down to 8x7m. Works to reshape tree following the failure of an adjacent tree and to clear neighbours shed and boundary wall.T6. Leyland Cypress rear garden LHS - Reduce height by approximately 3 metres and shape laterally as required 16x10 down to 13x8m. Works to allow light to rear of property.

- 1. Yew on rear boundary reduce and reshape LHS of tree To shape / tidy. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth and shall not exceed beyond the previous crown reduction points. 8x6m down to 7.5x5.5m encroaching on lawn area. - 2. Yew in rear garden behind Beech hedge / seating area. Crown Reduction. Reducing the height and spread of the tree by up to 4 metres, remove 1st low limb to crown lift over lawn. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Height pre works 15m post 12m crown spread pre works 15m post 12m 6x2m down to 4.5x2m to maintain size. - 3. Repair holes in lawn area by rose bed in top corner of garden behind garage created while felling ash in neighbours. supply grass seed and approx 1 wheelbarrow worth of topsoil. 3. 7x5m damaging path and patio area. -5. Oak on boundary with Gatton road - Reduce limb growing through and spoiling the visual appearance of the adjacent Yew tree (item 4) to in line with fence Low 7? limb to reduce by approximately 5 metres. -6. Yew on rear boundary reduce and reshape LHS of tree To shape / tidy and shorten 1 branch to the right. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth and shall not exceed beyond the previous crown reduction points. 8x7m down to 8x5.5m works to improve the visual appearance. -7. Holly rear boundary - Reduce / trim all over to shape 4x4m down to 4x3m works to improve the visual appearance. -8. Mixed species rear garden RHS - Reduce / trim encroachment over lawn and remove dead Cypress to ground level 6x5m down to 6x4m encroaching on lawn

T1 - Oak - Crown reduce by 1m all over, to produce more stable tree on embankment T2 - Oak - Crown reduce by 1m all over, to produce more stable tree on embankment

Submission of a tree protection plan pursuant to condition 11 of permission 22/01084/F. Conversion of existing stable buildings into a new dwelling.

Application seek to discharge of condition 3 (materials) and condition 12 (trees) of 21/0949/FFU Change of use of land from agricultural to part equestrian and the erection of a building to provide livery stables and associated veterinary practice.

Approval of conditions 3 (detailed plans), 11 (licence issued by Natural England), and 13 (Tree Protection Plan) of planning permission PL/22/2508/FA - Change of use of land to residential, construction of detached dwelling with detached triple garage, parking and landscaping following demolition of stable block and associated outbuildings