Trees T1, T3, T4 & T5 - Crown Lift to achieve a maximum clearance over the garden area and/or parking spaces of 3metres between the branch tips and the surrounding surface. No pruning wounds greater than 80mm in diameter to be generated as a result of the works. Crown Reduce tree canopies on the adjacent building sides only to achieve a maximum clearance of 2metres between the branch tips and the adjacent building structure. No pruning wounds greater than 80mm in diameter to be generated as a result of the works. Additional - Tree T1 Silver Pendant Lime - Prune back branches to create 2m of clearance from the telecoms cables. Tree T2 Silver Pendant Lime - Crown lift to a height of 3m to provide clearance over the car parking area. Tree T3 Copper Beech - Remove broken branch from lower crown. Tree T6 Copper Beech - Crown lift over the stable building and shed to provide 2m of clearance between the branch tips and the adjacent building structure - No pruning wounds greater than 80mm in diameter to be generated as a result of the works.

T1 Twin stemmed Maple - Fell to ground level. T2 Dead Sycamore - Fell as close to ground level as possible. T3 Oak - Reduce crown over stables by 2-3m to reduce overhang. T4 Beech in horse field - Fell due to hollow trunk . T5 Lime - Reshape, reducing targeted branches by 2-3m to rebalance crown and remove all deadwood. T6 Sycamore sapling - Reduce to 2-3m in height due to Squirrel damage . T7 Mixed (BT Line) - Clear BT line on both sides of front driveway, using MEWP. Reduce Ivy covered dying stem to a safe height. SUBJECT TO TPO BB & OUDC 1 (27.10.1952)

Hawthorn (x2) : reduce the weight at the top of both trees, to remove dead branches and to create a more stable and balanced shaped canopy. The overall reduction in height will be approx 0.5m.

Demolition of existing stables/garage and erection of replacement outbuilding (comprising garage and ancillary accommodation) to serve Elm Tree Farm.

1 Lime rear boundary RHS Re-Pollard back to previous pollard points at 6 metres from ground level, removing approximately 8 metres regrowth 14x6m down to 6x2m works to alleviate stress on old decaying pollard points 2 Chestnut rear boundary Re-Pollard back to previous pollard points at 6 metres from ground level, removing approximately 5 metres regrowth 11x6m down to 5x2m works to alleviate stress on old decaying pollard points 3 Beech rear garden LHS Multiple crossing stems and weak included union on main stem at approximately 4 metres. Crown Reduction - Reducing the height and spread of the tree by up to 2.5 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 12x9m down to 9.5x6.5m(reasons are within the spec)

T1 Horse Chestnut: Crown lift epicormic growth to 5m from ground level; Crown reduce secondary growth towards the dwelling to achieve a maximum space of 2m; Remove branch being damaged and causing damage by direct contact to stable roof.

T1 Crimson King Maple - Reduce overhanging branches on Stable Close side by 1.5m. Height Reduction of 1.5m.

Beech (overhanging neighbours at 9 Fenton Rd) Reduce the height and spread of the tree by up to 2m and thin canopy by removing established epicormic growth. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Written consent from the neighbour is required before works commence. Reason: Good arboricultural practice to maintain reduced trees. The crown thinning element will remove the potential for future crossing and rubbing branches. Pre works 15x14m, Post works 13x12m

Fell Sycamore TPO 140 T1 and plant replacement tree 20m away from Rectory Stables.

T1. Bay rear garden RHS - Crown Reduction. Reducing the height and spread of the tree by up to 5 metres and remove major deadwood greater than 25mm in diameter. Reduce encroachment into neighbours to boundary line. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 14x10m down to 9x5m Dieback in upper crown T2. Variegated Holly rear garden RHS - Crown Lift to provide 3 metres clearance from ground level and clip round to shape and tidy, removing up to half a metres growth 10x6m. Works to clear pathway.T3. Beech x 2 rear garden RHS - Crown Reduction. Reducing the height and spread of the tree by up to 3 metres and remove major deadwood greater than 25mm in diameter. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 18x12 down to 15x9m Tight included compression fork at 3m. Works to alleviate stress on weak union.T4. Holm Oak x 3 rear boundary - Crown Lift to provide 3 metres clearance from ground level 9x7m. Works to allow light under trees.T5. Yew rear garden LHS - Crown Reduction. Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 10x9m down to 8x7m. Works to reshape tree following the failure of an adjacent tree and to clear neighbours shed and boundary wall.T6. Leyland Cypress rear garden LHS - Reduce height by approximately 3 metres and shape laterally as required 16x10 down to 13x8m. Works to allow light to rear of property.