T8, Ash of TPO. This tree has Ash Die Back, deadwood, tree in decline with epicormic shoot indicating stress. Pollard to 8m to reduce risk. Tree in decline with epicormic shoot indicating stress. Tree 399 on map

One walnut ( juglans ) tree to reduce by 30% approx 2/3. Approx off crown Two thuja trees to reduce in height by 30% approx 7/8 metres One triple stemmed Ash ( fraxinus excelsior ) that???s is in decline with ash diebackfell to ground One ivy covered sycamore to reduce crown by 25/30% approx 2/3 metres off canopy and prune away from building Sycamore (acerpseudoplatanus ) to reduce a group of four sycamores by 30% approx 3/4 meters off height

1x Common Oak reduce crown over garden and overhanging branch by up to 3m work designed to keep tree safe in its situation.

G1 - Re-reduce Lawsons Cypress hedge to previous points (approx. 1m) This hedge has been managed every few years at this height to maintain it.

Common Beech tree (Fagus Sylvatica) to west of house (T1 on plan) has grown vigorously to the south east and now overlaps the house with branches in contact with the house roof. Tree to be trimmed by up to 2.4m to maintain adequate clearance from the property and to reduce the drip line from the roof. Work is to protect both the tree and the house from damage due to contact.

T1 Yew - Remove lower growth on tree that is extended towards barn. This to include removal of 4 low limbs. The remaining growth extended across towards barn is to be reduced by around 1.5 meters to give a more upright balanced shape to the tree with around 4 meters clearance over ground on the barn side. This work is in order to improve the overall balance and form of the tree which currently has a very one sided crown shape, biassed towards the adjacent barn. The work is also to improve access on the drive and to give better clearance from the barn roof. T2 Copper Beech - Crown reduce by around 1.5 meters in height and spread to a well balanced, more compact tree with reduced sail area. Remove all major dead wood and sever Ivy at base of tree. This tree is infected with Kretzschmaria deusta and hence there will be an increased risk of failure. The reduction work specified will reduce the sail area and lessen the risk of failure without compromising the visual appeal of the tree. This tree is now showing signs of decline with a sparser than average foliage density and die-back of some branches.

T1 Silver Birch - Overall crown reduction 1.5-2m T2 Silver Birch - Overall crown reduction 1.5-2m T3 Silver Birch - Overall crown reduction 1.5-2m

Tree Number - T1 Tree Type - Silver Birch Approx. Height - 10m Approx. Crown Spread Diameter - 8m Location - As per photo Service - Crown Reduction Work Required - Reduce height by up to (2m) and lateral spread on all sides by up to (2m), Crown lift to 3m all round Reason - As per clients wishes

G1 - G3 - 3 x Oak Trees - Remove major deadwood throughout whole crown area (Deadwood > 25mm in diameter). Reduce back the lateral extent growing towards the house and garden by 1-2m. G4 - Lime - Remove major deadwood throughout whole crown area (Deadwood > 25mm in diameter). Remove basal growth and epicormics up to 3m. Reason: To manage and maintain the trees within their residential environment.

T1 Scots Pine Condition : Unfortunately, all foliage has perished from the tree. A number of trees in the group have failed in recent years. I would suspect that the recent dry years have caused significant stress to the trees. The tree is dead. Height - 16m Crown Spread - 4m DBH - 500mm Work required : Fell to ground level and replant nearby in a suitable growing location. T2 Scots Pine Condition : Unfortunately, all foliage has perished from the tree. A number of trees in the group have failed in recent years. I would suspect that the recent dry years have caused significant stress to the trees. The tree is dead. Height - 14m Crown Spread - 3m DBH - 400mm Work required : Fell to ground level and replant nearby in a suitable growing location.