TPO 1 - Walnut, reduce limb growing toward the house by 2-3m due to old fungus on main stem. TPO 2 - Oak, remove all major deadwood. TPO 3 - Sweet Olive tree, no work TPO 4 - Holly, trim to clear BT cables by 0.5m. TPO 5 - Beech, raise canopy to approx. 3m G1 - 2 Common Yew trees, trim to clear BT cables by 0.5m and trim driveway side back level with the wall.

T1 Horse-chestnut - Prune crown away from lawn/ rear of house 1-1.5 metres. Thin remainder 20%.

G1 - 3 x Oak -Deadwood all trees throughout. Cut 2-3m off limb overhanging the road. Oak closest to front of house, laterally reduce by 2-3m over roadside and crown lift over the road by 4-5m.

A. ivy covered Lawson. Dismantle and fell to ground level. B. Lawson, reduce height by 50%. C. Yew tree, reduce height and width by approx 2-3m. D. Conifer hedge, reduce garden side so that it thickens up. E. Lawson. remove. F .Lawson, reduce by 30%. G. Lawson reduce by 50% and remove the limb from the Tree of Heaven growing towards the property. H. Multi stem Lawson. remove. I. Lawson, reduce by approx 50% . J. Lawson, reduce by 50%. K.Tree of Heaven, remove. L. Sycamore, reduce by 20-30%. M .Reduce shrubs to clear fence line by 1m. N. Conifer hedge, reduce to approx 1-2ft above fence line. Trim Mansion house side to level to encourage it to thicken up. O. Mature Oak, thin canopy and reshape/reduce branches growing towards 2 Red Oak Close. P. Conifer hedge, reduce to approx 1-2ft above fence line and trim Mansion house side.. Q. Group of self-set Ash to remove to ground level. R. Goat Willow to remove to ground level.

T1. Silver birch - Crown reduce all round close to former reduction points, approx 25%. T1 is extensively shading front of house .

Horse Chestnut (T1) - prune to thin crown by approximately 25% to allow more light to garden and house. Ash (T2) - prune to reduce crown by 25% ( approximately to previous reduction level) to allow more light to garden and house.

Erection of enclosed swimming pool accessed through the cellar of main house. Installation of solar panels to existing building, removal of rendered section to rear and re-face with limestone to match existing and removal of conifer trees to rear (part of development already commenced)

T1 Oak - raise canopy to conform to highways act and remove all major deadwood T2 - Oak, remove all major deadwood. T3 - Lime, reduce whole tree by 5-6m due to exposed heartwood at base and remove all major deadwood. T4 - Oak, reduce lower limb by 4-5m to clear building and remove all major deadwood. T5 - Small Lime, dismantle and fell to ground level as this is a poor specimen due to the tree growing under the canopy of the mature trees. T6 Oak, reduce house side only by 3-4m and remove all major deadwood. T7 - Neighbours Oak tree, remove all major deadwood from your side only T8 - Group of Yew trees, reduce front back to clear curb edging by 1m

Ash (T1) - remove two lowest branches overhanging adjacent garden and selected smaller branches overhanging adjacent summerhouse and shed. Prune back overhanging branches in upper crown by 1m to allow more light to adjacent gardens. Yew (T2) - lift crown to approximately 2m above ground level to allow more light to shrub bed. Hazel (T3) - coppice to allow more light to shrub bed. Sallow (T4) - re-pollard to prev. pollard points to allow more light to shrub bed. Beech (T5) - reduce crown by approximately 20% to reduce weight and wind resistance. The tree leans heavily towards the house.. Lime (T6) - prune back low branches overhanging adjacent garden by 2.5m to allow more light to garden. Lime (T7) - prune back low branches overhanging adjacent garden by 2.5m to allow more light to garden. Thorn (T8) - prune to clear phone wires by 1m. Ash (T9) - prune to clear phone wires by 1m. Sycamore (T10) - prune to give 2m clearance to adjacent Cedar. Sycamores (T11 & T12) - lift crowns to approximately 6m above ground level to allow more light to garden. Sycamore (T13) - lift crown to approximately 6m above ground level over the drive to give adequate clearance for delivery vehicles. Yew (T14) - lift crown to approximately 6m above ground level over the drive.

T1 Sycamore remove and grind out stump as its grown too close to boundary wall and causing damage.T2 Dying Beech tree remove. T3 and 4, 2 Lawson trees to remove as they are growing out of the patio.T5 Sycamore, we already have permission to reduce this tree by 50%, (20/01392/TPO) T6 Lime tree to reduce by 3-4m in height and 1-2m in width, to allow more light into the garden.T7 Cedar remove as this tree has grown under the canopy of the other trees and is now out of shape and will never fill out into a nice tree.T8 Horse Chestnut to reduce by 3-4m in height and 2-3m in width, to allow more light into the garden.T9 Lime tree to reduce by 3-4m in height and 1-2m in width, to allow more light into the garden.T10 Horse Chestnut to reduce by 3-4m in height and 2-3m in width, to allow more light into the garden. G1 Group of 4 Sycamore trees to remove and grind out stumps as these trees have grown very close to the boat house and will start causing damage to this in the future.