Non material amendment to planning permission 22/04862/FUL: Windows to boundary reduced in size, 2.4m high Paladine fence to boundary with adjacent house replaced with close boarded timber fencing, all render on elevations replaced with reconstituted stone, string course removed

Non material amendment to planning permission 19/03650/MAF: Increase in height of intermediate boundary fences on canal side of development. Alternative front boundary railings.

Non-material amendment to planning approval 20/03387/HOU to reduce single storey side extension in length, ground floor door and windows omitted from east side elevation and fence to boundary with No 16 omitted

Non material amendment to major planning permission 18/04867/MAF: new car parking area adjusted, new service yard gate updated and moved, fence to perimeter of southern boundary adjusted, service road widened between Inmoor Road & gate, omission of 1 No service door

Non-material amendment to planning approval 18/04867/MAF: Proposed car park to be segregated from service yard and parking increased from 53 no. spaces to 57 no. spaces, access to pond added, service access, fencing and gates to south amended, dock leveller marginally increased, service doors to east elevation changed in size, gates and fencing added to car park

Non-material amendment to planning permission 20/05576/NMA01: Plots 9 - 12 were detailed on the Approved Planning permission as split level units and the C type House layout which were split level 2/3 storey. It is proposed we change these to the B type unit - drawing 526/23(02)011 G. The rear gardens would be on a gradient of 1:12 (rather than the stepped units taking out the 2.5m change in level) with the rear fence remaining at 1.8m in height. The main change in level would be at the rear boundary where there would be a 3/3.5m high Tobermore retaining wall which would face on to the POS area which is detailed on the Site plan. The previous proposals did have a Brickwork RW in the same location at around 1.5m in height. Solar PV panels added to plots shown on site plan.

Non-material amendment to planning approval 21/03050/HOU : Change 1.8 metre opaque glazed screen to upper decking area to 1.8 metre solid fence screen

Non-material amendment to planning permission 20/03552/FUL dated 17 Feb 2021 to include Substation enclosure and RMU enclosure swapped around , Northern Power Grid requirement. Change from separate base plinths (one for each enclosure) to a single plinth (with both enclosures on the same plinth). RMU and substation rotated 180 degrees and set to the south of the plinth (i.e. further from the service yard fence) rather than to the north of the plinth , Northern Power Grid requirement. Below-ground precast concrete draw pit added south of the RMU enclosure (with precast concrete lid) , Northern Power Grid requirement. Ref revised external National Power Grid (NPG) sub-station enclosure and Ring Main Unit (RMU) enclosure within the service yard

Non-material amendment to planning approval 16/08606/FUL: To change the boundary treatment to enclose the outside space with a 1.8M hit and miss fence, and change external paving to include an area of level permeable gravel

Non material amendment to planning permission 19/01763/MAF: to include minor alterations to fence boundary from paladin to timber featheredge