Remove 1.8m hedge and replace with 1.8m timber fence

Removal of all on site equipment. Installation of a replacement 25m lattice mast together with the enlargement of the base station to include 6 No equipment cabinets and new 2.4m high security fence to the compound. Enlargement of the site entrance with new gate to enable vehicular access to the site.

Retention of boundary gates and fencing - resubmission

New boundary wall and fence to replace hedges (retrospective application)

External boundary security fence and gates (maximum 2.0m height measured from within the site boundary)

New boundary wall, fence with gate, replacement detached brick garage and wider drive and new retaining walls in front and rear garden

Porch and new 1.8 m high fence and gates to the front

Construction of garden fence, driveway and gate

Rear conservatory, raised patio area, metal railings and timber fence to side boundary (retrospective)

S1 Ash - Remove stem leaning directly over the boundary fence line from the neighbours at 45 degrees from the base up to around 4m. See marked photos S2 Oak - Remove limb to branch collar. Extending approximately 8m horizontally. W1 - Reduce radial spread and general drip line, of mixed deciduous mostly comprising of Oak and Sycamore by 3m max. At the gable end, remove up to 5m to enable clearance of roof overhang and excessive encroachment. Reductions would not be greater than a quarter of length, removing end loading only up to 75mm diameter wound size, to appropriate forks and growing points.