T1 Beech - prune branches to 5m from house T2 Sycamore - prune branches to 5m from house currently touching roof

G1 Elder, Holly, Beech - Fell G1 Shrubbery mix beneath and up into the Cedar canopy - Remove Atlantic cedar part of G1 in the application - Crown thin by 15% max by removal of secondary and tertiary growth under 40mm diameter only at the outer 3m of the radial crown spread (crown thinning the "inner crown" is not approved as this will likely increase the risk of branch snappage. G2 Section - Remove between the 2x golden Leylandii on the SE boundary T1 Golden Conifer - Crown lift to 4m to clear house G3 Section - Remove low level mixed in the SE corner by the gate comprising of Xmas spruce and shrubbery T2 Conifer - Fell G4 3x Conifer - Fell T3 Golden Leylandii - Reduce by a third removing 4m leaving 8m overall height (approx) G5 - Lift block on the drive to 3m for clearance on the drive and safety when exiting. Generally tidy canopies removing sagging branches, longer limbs extending from canopy shape, and dead branches.

T2, Pine - Thin crown by 15%, deadwood and create 2 metre clearance from house

Large Sycamore (T1) - fell, tree is visably in poor condition, around 50 percent of the canopy appears dead. Large chunks of deadwood are near to targets - car parking area. Leaving a wildlife stump approximately 14ft high Ash (T2) - fell, tree is within 7 m from house and is showing signs of Ash die back in the canopy

Horse Chestnut - Height of the tree is approximately 20m-25m. Requesting a reduction in height of approximately 5m-10m to leave a height of 15m. Reduction of the branch facing the house, it is approximately 6m and wanting to reduce it to 3m.

T2 Maple. Prune back canopy encroaching the house to clear by 2m max, leaving 3.5m radial spread (approx). Crown lift to 4.5m max. T4 Silver Birch. Prune to clear house by 2m, and neighbours gable end at Lyndhurst by 2m removing lateral growth back to primary limbs. Removal of low branches (see photo) T6 Purple Plum. Full reduction by removal of 3m max remaining 5m overall height, lift to 2.5m to clear shed.

T1 Sycamore - Crown lift to 8m to give 8m clearance from ground level and draw back from roof to give 3m clearance T2 Sycamore - Crown lift to 8m to give 8m clearance from ground level. Remove epicormic growth and draw back limbs to give 2.5m clearance from side of house

T1 Beech - Crown reduction; reduce the eastern (actually E.S.E.) canopy from 9.5m to 6m (i.e. canopy is to stop 1m short of the flank wall of the house). Reduce the northern (actually N.N.E.) canopy from 10m to 6m. T2 Beech - Crown reduction; reduce the eastern (actually E.S.E.) canopy from 9.5m to 6m (i.e. canopy is to stop 1m short of the flank wall of the house)

T13-C2 and T12-B2 Beech Trees - Trim canopies to achieve a 3m clearance from the front of the house and crown lift to 5.2m above road level

G1 Mixed coniferous and deciduous - Carry out canopy cleaning by removal of crossing, rubbing, dying, broken, diseased, low vigor, competing branches and remove stem growth. Thin canopy up to 15% to reduce wind resistance, debris fall and allow dappled light to the house and garden.