T1 Hornbeam Crown Lift to provide 4m clearance from ground level, G1 Hornbeam Crown Lift to provide 2.5m clearance from shed roof, T2 Oak Crown Reduction - Reducing the height and spread of the tree by up to 2-3m, T3 Oak Crown Reduction - Reducing the height and spread of the tree by up to 2m and remove deadwood, T4 Silver birch Crown Reduction - Reducing the height and spread of the tree by up to 2m, Works to maintain trees size, and to increase light into the woodland understory. (TPO1/1971)

Oak tree requires 3m Crown reduction and balancing to keep tree in good health, branches are causing damage to neighbouring shed. (TPO21/2001 and TPO50/1996). TPO21/2001

G1 Ash Remove large laterally growing limbs over drive & grass, Dead wood and crown reduce remaining stems by approx 1m and crown lift over road to allow 4.9m clearance T1 Ash Remove new growth from old stubover neighbours shed T2 Ash Section fell dead stem to as close to ground level as possible T3 Ash Remove all deadwood, and reduce large low limb over neighbours by 1/3rd its current length T4 Ash Remove major deadwood (Deadwood > 25mm in diameter )

T1 Small Birch tree fell due to conflict with driveway. T2 Small Pine tree fell due to proximity to powerlines, BT cables and to allow access to shed. T3 Apple tree fell as dead. T4 Willow tree with storm damaged limbs. Carry out pollard back to suitable points to remove damage and allow for new regrowth. T5 Alder tree carry out minor crown raise back to suitable target points to assist mowing T6 Beech tree carry out minor crown raise back to suitable target points to assist mowing T7 Cherry plum fell as dead and half fallen over. T8 Apple tree fell as dying with major dieback in crown. T9 Cherry tree carry out minor crown raise to assist mowing T10 Cherry tree reduce over extended limb back to suitable target point. G1 Group of small Cherry suckers fell due to proximity to wall. G2 Group of small self set ash saplings fell due to proximity to wall.