Thinning by 20% and dead wooding 3 Pine trees above garden office. Thinning the Pines to reduce sail and clear any damaged or crossing limbs All work to be carried out to BS3998

To supply Ground Control Team NPTC/Lantra Qualified Arb Team using chainsaws, chipper, and rope/harness technique, who will attend site and carry out the following scope of works. Set up a safe working zone using cones, barriers, and signs as appropriate. - T1-Crown Reduction unidentified species approx. height of tree 18metres, using rigging reduce approx. 2 metre overall from the growing tip to lateral crown. Removal of any deadwood over 50mm in diameter from canopy and epicormic growth up to 2m on the main trunk. (Reason) Due to tree encroachment. Location - car park near sample office. - T2-Prune unidentified tree, cut back limbs resting on spotlights and camera, reduce by approx.2 metre overall from the growing tip to lateral crown.

T2 mature Elm - Fell to as close to ground level, grind/remove stump & replace with an Ulmus species, 10/12cm girth or other suitable species/final location to be agreed with LPA. Refer to supporting documentation attached to application for internal decay detection results and recommendation. T1 mature Elm - remove three tertiary branches belonging to branch at 5m to south (locations of final pruning cuts indicated in annotated photo) in order to achieve 5.5m clearance on south side of tree (approx. 2m south of trunk) to accommodate site office/welfare containers. T34 semi mature Sycamore - remove branches located in lower south side of canopy (locations of final pruning cuts as indicated in annotated picture) in order to achieve 6m clearance on south side of tree to accommodate site office/welfare containers.