T18 - Horse Chestnut - Cut back scaffold branch at a height of approx. 4m to the south by half of its existing length leaving the branch approx. 4.5m in length. To reduce the weight of the branch that is over residential dwelling. Tree surgeon suspects branch union to be included.

We have five mature trees in our rear garden that need attention. They are four sycamore trees and one coniifer. Two of these trees have TPO's. The two sycamore trees with TPO's (T88 and T87) include one purple sycamore. I want to reduce the height of all of them by 1-2 metres and 'cone' them in shape. They are mature and are currently about 16-18 metres in height. They overhang the drive entrance to Rottingdeam playground and need to be kept safe as the drive is used constantly by cars, council vehicles and pedestrians. Some branches reach over the gardens of an adjacent residential drive - the Rotyngs.

T1 is a willow overhanging a residential car parking area. It has been reported that several branches have fallen out recently, and on inspection, there is evidence of dead, decayed and broken stumps. Necrotic bark continues down the stem to approximately 4-5m above ground level, whereupon a cavity and corresponding reactive wound wood is being laid down. The suggested works, namely a heavy reduction, to remove the necrosis and soft decay, will alleviate the potential for further failure, while leaving the cavity with very little weight upon it, as natural habitat. T1 - Willow Remove stem leaning over parking space number 5, back to approximately 5 metres in height, to remove dead, dying and broken branches overhanging car park

Field maple, hawthorn + cherry (0004) - From corner of woodland by residential gardens to 50mph sign at roundabout, crown lift roadside only trees to 2.5m and cut back all woody vegetation 0.5m back from footpath edge. Sycamore (0003) - Over-mature sycamore with cavity in lower stem and fire damage, remove all deadwood from above path. Ash (0002) - Group of 2 multiple stemmed ash, both with dieback disease and tagged tree has Inonotus hispidus. Fell both trees at waist height, stack timber and brash neatly into habitat piles within woodland well away from path. Cherry (1500) - Group of trees around lamp column 34, prune 2m clearance to lamp head and column. Cherry (0001) - Group of trees around lamp column 33 prune 2m clearance to lamp head and column.

Mature Sycamore trees T12, 13, 14. Approx. 16m tall - remove cut back height by up to 3m to leave trees at 13m. Cut back branches on east side only by up to 4m to old pollard, pruning points, no further than 1.5m east of residential boundary wall.

T1 - Macrocarpa Crown lift to 5 metres. Remove major deadwood and damaged branches. Reduce laterally on the southern side that overhangs a residential property by 1.5 - 2 metres. Balance this pruning by reducing laterally on the east and west elevations by approx 1-2m. No height reduction, all pruning will be back to good growth points.

T1 Walnut 'maximum 2m height reduction, approx. 1-1.5m (depending on growth points) lateral spread to balance and shape the crown. Reason: To mitigate low light levels to nearby residential property