Non material amendment on application S/2776/16/RM for changes made to S01 listed below: 1/ Ground floor balcony screens removed as each flat has a defined boundary wall. 2/ External balcony frame removed with julliet balconies replacing walk on types. 3/ Projecting bay to bedroom in 4 storey section terminated at second level with level 3 opening moved back onto general face of building. 4/ Hidden roof and internal gutter to projcting bays changed to flat lead roof to match entrance canopy. 5/ Rain water gutters now continuous at projecting bays resulting in relocated RWDP's 6/ O/A opening width of window to balcony in lounge within 3 storey section reduced by 532mm 7/ Steel supported corner opening in lounge within 4 storey section replaced with 2 no individual openings on each face reducing effective width by 1578mm

Non material amendment of planning permission 21/05233/HFUL (Demolition of a rear single storey lean-to, the construction of a new single storey pitched roof rear extension and linking range to Tyne cottage. Renovation of the existing property and repair and replacement of the existing timber windows. The construction of a two-bay cart lodge and alteration and conversion of an existing outbuilding. New boundary treatments will be applied to the site) change the angle/orientation of the glass link roof.

Non material amendment of planning permission 21/03359/HFUL (Single storey front and side infill extension, conversion of garage to habitable space, erection of boundary wall with timber fencing to front, and associated external works) addition of Timber cladding to the rear of the garage, changes in fenestration, setting the proposed external wall in line with existing wall line, extended roof and porch retained to create a covered terrace area and the inclusion of decking as a floor finish

Non material amendment of planning permission 19/1212/FUL (Demolition of the existing octagonal building and erection of two new student accommodation buildings comprising 23 rooms. Replacement of existing gardeners accommodation with free standing gardeners building, replacement of cycle storage, new boundary and entrance treatment) minor changes to the roof pitch, minor changes to window size and positions, and enlarged space for ASHPs within the gardeners store.

Non material amendment on application 18/1273/FUL for alteration to zinc specification; replacement of existing stone paving with permeable paving; installation of new porcelain paved terrace to rear; revision to boundary treatments; and amendments to windows and doors.

Non material amendment of planning permission 20/04953/FUL (Erection of access ramp to Grove Lodge Cottage and conversion of window to door. Partial demolition of boundary wall to Grove Lodge) Removal of the steps at the western end of the ramp.

Non-material amendment on 19/0997/FUL for addition of gate in boundary wall, design changes to create garage instead of carport, and alterations to window, access, overhang to roof and brick finish

Variation of condition 2 (approved plans) of planning permission 19/0199/FUL (Extension and conversion of the existing building to create 6no. flats comprising 1 x 3-bedroom units, 1 x 2-bedroom units and 4 x 1-bedroom units along with car and cycle parking and provision of a communal garden following the demolition of the existing studio building.) to amend the as built distance between the site boundary and the building, install two new high level windows at ground floor level on the Eastern side elevation, amend the width of two approved roof lights in the Eastern roof slope, remove two chimneys, remove timber panels with a render finish infill, installation of 4no. flat roof lanterns to the flat roof area of the extension, install pair of French doors instead of windows on the ground floor extension of Flat 1, install one automatic opening vent (AOV) roof light and the removal of 2.no small oval windows

Non material amendment on application 12/1116/FUL to replace the glass roof over the corridor leading to the conservatory. The replacement roof will be a warm roof covered with black EDPM. It will be tilted at 5 degrees towards the boundary just like the current roof. This requires the wall at the boundary to be raised by 22.5 cm to allow the joists to be supported by the original kitchen wall. It will have an opening window like the current roof.