T1 - Corsican Pine Tree, to remove 2 lower limbs hanging over sheds and garage below and have major deadwood removed from the crown.

T1 - Ash - Crown reduce 1x Ash to approx 2ft above previous reduction points, removing 3m in height and 2m in radial spread retaining tree at 8m. Remove 2x lower branches overhanging neighbouring property and shed in rear garden,T2 - Horse Chestnut - Crown lift lower branches from 1x Horse Chestnut lifting canopy to approx 4m above ground level

Fell Pittosporum as this is dead and the remaining trunk (approximately 15 ft in height) is rotting and constitutes a hazard. Prune Laurel and reduce height by 40 percent to prevent interference with garden sheds. Prune Prunus and reduce height by 30 percent so that it is clear of neighbouring Hawthorn, all in rear garden.

T1) Taxus bacata - common yew (x2`) & Laurus nobilis - bay leaved laurel: 03 no. trees on the roadside boundary; to lift the crown of these trees over the road to KCC Highways specifications - 5.2 metres over the carriageway & 0.45metres in from the road onto the curb then a minimum of 2.4metres over the remaining footpath.T2) Robinia pseudoacacia - false acacia Medium sized, ivy clad tree located on the roadside boundary overhanging the pub garden and shed; fell

Salix caprea - goat willow: Large tree situated in the rear garden in very close proximity to the boundary wall and garden shed; re-pollarding back to the previous points at 8m AGL roving approx. 5m of growth. Height reduced from 13m to 8m and radial spread from 6m to 4m approx.

TG1 - To crown lift 3x Lime's, 2x Cherry's and 1x Horse Chestnut to 6m over roadside - To clear internal growth failing BT lines on 1x Lime - To prune branches failing on BT line over road side on 1x Lime to give 1m clearance to wires and remove epicormic growth on main stem T2 - To prune 1x Conifer reducing the overhang to the shed by approx 1m and also removing all branches overhanging neighbouring property back to boundary T3/4 - To prune 2x Cherry away from building giving approx 1m clearance T5 - To reduce branches from 1x Horse Chestnut overhanging sports club by approx 2.5m T6 - To reduce branches from 1x large Horse Chestnut overhanging cricket nets by approx 2.5 m T7 - To reduce branches overhang from 1x horse chestnut next to orchard by approx 3m and crown lift over footpath to 4m T8 - To crown lift 1x Ash on rear boundary to 4m over footpath and reduce back overhang by 2m

T1 - Oak - Pollard to first major junction - approx 15ft. T2 - Oak - To reduce overhanging branches back to shed area and shape into upper crown. On rear boundary.

T1 - Willow - To crown reduce by approximately 2-2.5 meters in height (at its tallest points) to a height of approximately 20ft and in width as required to balance the remaining crown. G1 - Conifers - x2 conifer trees growing to the side of the shed in the back section of garden to section fell to ground level and grind stumps. G2 - Conifers - x 4 conifers growing along the rear boundary fence to fell to ground level and grind stumps. G3 - Conifers - Small "hedge row" of conifers that divide the front and back sections of the garden to fell to ground level and grind stumps T2 - ash - located behind the willow on the property boundary to sever a ring of ivy around the stem

Erection of two sheds, brick piers and gate, new boundary wall, single-storey rear extension, front porch and removal of Elder tree.

T1 Acer Pseudoplatanus - Sycamore located on right hand side, to lift the crown of this tree to a height of 8metres, by the removal of the lowest 2 large branches over the garden. T2 Fagus Sylvatica - Common Beech located on the left hand side, to lift the crown of this tree to a height of 5metres by removing back to the boundary line the large limb over the shed.