T1 & T2 horse chestnut trees next to front gate, pollard both trees to approximately 3 metres in height. T3 eucalyptus tree Fell to ground level. T4 trees overhanging Driveway prune back overhang to allow access. T5 plum tree remove 3 large limbs overhanging Driveway. H1 conifer hedge and single tree around cabin lift lower branches to a height of 2.5 metres and prune back overhanging branches to provide a 2 metre clearance from the roof. G7 group of 6 Trees to the rear area of cabin, section fell all 6 trees to ground level . T8 conifer tree next to water fountain section fell to ground level. H2 L shaped conifer hedge next to rear car park area reduce height of hedge and trim back sides to previous points to produce a boxed shape. T9 multiple trees growing over house roof and ajasent building prune back all overhang to provide a 2 metre clearance including overhanging park trees where needed. T10 mulberry tree crown clean and thin canopy by 15% to promote healthy growth. T11 willow lift crown where needed.

2 x Pine - Reduce lateral spread growing towards pool by 2m, raise crown to 4m & remove deadwood T1 x Pine (nearest house) - Fell to ground level. To reduce needles on roof/leak was caused due to excessive needles clear overhang over new pool (TPO no.14, 1971)

Left hand side of house near rear boundary T1 - Oak Remove epicormic growth up to crown break. Remove 3x secondary limbs overhanging Garage roof reduce back remainder of overhang from edge of garage roof to edge of Garage line retaining healthy growth. Remove major dead and diseased wood 25mm in diameter and over. . The tree is located to the side of the garage area by the boundary fence . Removal of Epicormic growth to allow more suitable light levels through the lower crown . Removal of 3x Secondary Limbs and Reduction of overhang from the garage roof to reduce the extent of the encroachment from the garage and garage roof . To reduce the amount of leaf fall on to the roof and in to the gutters . To allow more suitable light in to the access path Left hand side of driveway T2 - Oak Remove lowest limb, reduce back overhang from driveway to line of shrubs at base while retaining healthy growth. Remove major dead and diseased wood 25mm in diameter and over. . The tree is located to the left hand side of the driveway . Removal of the lowest limb and reduction back from the driveway to reduce the extent of the encroachment from the driveway . To allow more suitable light levels in to the access path and understory . To reduce the extent of debris falling on to the vehicles when parked on the driveway Rear garden, back boundary, middle T3 - Hazel Reduce back overhang from neighbouring garden to boundary fence line. . The tree is located in the rear garden to the rear boundary . Reduction back from the neighbouring property to the rear boundary to reduce the extent of overhang in to the neighbouring property . To allow more suitable light levels in to the rear boundary of the neighbouring property Rear garden, back boundary, middle T4 - Thorn Reduce back overhang from neighbouring garden by approximately 1.5m of the branch length (TPO 21 of 1974)

Hornbeam 1(front garden) lift to clear house by 5 metres. Branches are currently in contact with roof and gutters. Hornbeam 2 (back Garden) lift to clear 4 metres over garden and crown thin by 20%. Hornbeam 3(rear of back garden) remove trunk growth only. (TPO 3, 1968)

T1 Beech - prune back lateral branches growing over house back to create a 3-4m clearance measured from the roof. T2 Beech - prune back lateral branches growing over house back to create a 3-4m clearance measured from the roof. T3 Horse chestnut crown lift upto to 4 metres measured from ground level. (to max cut size of 25mm)

Hornbeam T1: Reduce the height by approx. 2.5-3m to approx. 4m from ground level. Reduce the lateral spread of the remaining crown, by 1-1.5m to shape. Reason for application: To maintain the hornbeam as a smaller tree, to abate competition with beech tree and mitigate decay in trunk. Beech T2: : Prune back the lower regrowth toward the house, by 1m approx, to previous reduction points, to maintain clearance to the house. Reason for application: Maintain clearance to house Crab Apple T3: Remove the large low branch growing toward the neighbour's house. Reduce the lateral spread over he neighbour's garden and toward the road, by 1-1.5m. Thin the crown by 10% by pruning out water shoots. Reason for application: To limit spread over the neighbouring property and allow more light through the crown. Apple T4: Tree with decayed trunk, to left of house/ deck: Reduce in height by 1m approx, to reduce leverage on trunk. Reduce the low limb growing over the deck by 1m approx. by shortening the leader back to the strong side branches above the deck. Remove the 50mm diameter secondary branch adjacent to the corner post and the 30mm diameter secondary branch toward the house. Reduce the remaining spread of the crown by 1m approx. to shape and balance. Thin the crown by 15% by pruning out water shoots and crossing/ rubbing branches, to give an even density throughout. Reason for application: To maintain clearance to deck and house and mitigate extensive decay in trunk. Apple T5: Left side of house, by decking steps: Reduce the crown by 2.5m in height and approx. 1m in spread, to maintain a more compact crown and give clearance to the roof. Thin the crown by 15% approx, by pruning out water shoots and crossing/rubbing branches, to give an even density throughout. Reason for application: Maintain clearance to deck and house Prunus Group T6: 5 stems, behind garage: Prune lateral spread to provide a clearance of 50-75cm from the garage roof (Croham Manor CA)