Demolish existing car port, raise front boundary wall, erection of parapet to garage roof, installation of new pedestrian and vehicular entrance gates, erection of a side boundary fence, and installation of a window into the rear elevation basement wall.

Demolition of existing entrance and storage building, external building alterations and associated works including new entrance and first floor alterations (permitted development) replacement of windows and doors, alterations to mullions, repair of roof tiles, installation of Air Source Heat Pump and associated compound fence, hard surfacing, installation of 1 no. cycle storage shelter and electric charging, refuse storage area, landscaping, external lighting and CCTV, access ramp and steps, erection of electrical substation, boundary treatments and any other associated infrastructure.

Single storey extension, 2no. rooflights and juliet balcony to rear, 1no. dormer window and rooflight to front, detached garage and boundary treatment

Single storey extension, 2no. rooflights and juliet balcony to rear, 1no. dormer window and rooflight to front, detached garage and boundary treatment

Variation of condition 2 pursuant to planning permission DM/19/03150/FPA for amendments to external staircase from upper balcony, garage side door omitted, boundary wall adjacent to garage door amended, amendments to drainage and external works layout around perimeter of building, garden room side extension added, circular sunken patio added, staircase to sunken patio added, garden room patio door increased in width, boundary fence added, roof windows added and amended, en-suite bathroom window omitted and TV shutter added in lieu, amendments to cladding layout and colours, garden room kitchen window added, external WC + washroom added to side elevation, amendments to ground levels, balcony balustrading amended, wall cladding to garage added.

1. Yew Prune back face closest to window by 1m to clear building, trim remainder of crown to shape (by up to 0.5m 2. Willow Crown lift tree adjacent to summer house to height of 4.5m 3. Yew Crown lift/cut back from access path to 3.5m 4. Rear hedge Trim top and sides to tidy 5. Laurel Trim back mainly Laurel group to clear back from lawn and re-establish group boundary 7. Shrubs Trim back shrubs overhanging drive (approximately 8m section) 8. Lime Crown lift Lime at drive entrance to height of 3m 9. Sycamore Fell tree which is in a state of advanced decline, as close to ground level as practical 10. Beech Remove major deadwood and prune to clear the streetlight by 2m Amended Description

Non-material amendment pursuant to planning permission DM/21/00028/FPA to allow alterations to ground floor doors and window positions and update to parking layout of plots 7-9; replacement of existing sub station building with 3 no. smaller buildings; replacement of approved palisade fencing with weld mesh fencing to boundary treatments; and removal of first floor mezzanines and windows and alterations to cladding specification to all units

Replace front door, window and bay window to the front with windows, porch to side, replace second floor dormer window, changes to boundary treatments and replace windows and doors.

Raise roof height, loft conversion, dormer and velux windows, replacement of boundary wall with roller shutter and refurbishment works to rear extension

Discharge of condition 3 (Investigation Report proposed timber) 4 (details of the surface treatment) 5 (sample stone work) 6 (rainwater goods) 7 (windows and doors) 8 (samples of roofing material) 9 (Pointing Details) 10 (Boundary Treatments) 11 (details of balcony) 12 (methodology for damp proofing) 13 (details of external ventilation to LB) 14 (Contaminated Land (Phase 1+2)) 15 (Contaminated Land (Phase 4)) 16 (ecology mitigation) 17 (coal) 18 (CMP - Deliveries) and 19 (in accordance with stuctural survey) of planning application DM/18/02617/FPA