T1 Birch - Fell to ground level due to damage caused to roof

Reduce southern aspect to 3m radius to balance crown to T1 Columnar Cherry, Crown lift by removal of 3 northern branches to clear building to T2 Sycamore, Prune out 1 branch on north east to clear building to T3 Sycamore, Prune out 2 branches on north east to clear building and clear cottage roof by 3m to T4 Norway Maple, Remove northern limb, crown clean and crown lift to 2.5m to T7 Apple, Remove 1 northern limb to T8 Sycamore and Remove extended south west limb to T9 Scots Pine

T1 Oak - crown lift to 5.5 meters above the road, remove deadwood. T2 Sycamore - crown lift to 2 meters vertical clearance above the garage roof and G3 - 3 x Maple - reduce lateral branch spread over gardens by 1 meter to retain 2 meter radial branch spread

T1. Ash - remove major deadwood, sever ivy at the base. Remove section of limb growing towards building, and remove limb growing over roof

Reduce and reshape T1 and T2 (sycamores) by 2-3m and prune to clear the roof by 3.5m

1.Mixed group - Fell large Conifer, reduce large Holly to a height of 3m, reduce all remaining woody shrubs to height of 3m and trim sides to shape/re-establish group boundary 2. Birch X 2 - Remove stem and prune to clear overhead phone lines by 1m 3. Bird Cherry - Remove stem encroaching roof/guttering, prune back branches overhanging neighbouring garden to the boundary 4. Mixed group - Fell Elder closest to Bird Cherry, reduce remaining woody shrubs to 3m and trim back sides to shape/re-establish group boundary 5. Elm - Finish off reduction started from neighbouring garden - to balance on garden side (by upto 1m) 6. Mixed group - Fell Elder in centre of collapsed Willow, tidy stubs from Willow and prune back from neighbouring garden. Fell large Conifer. Crown reduce and reshape Cherry tree by 3m 7. Willow - Remove large bows overhanging the shed, crown reduce and reshape the reminder of the tree by 3m to shape. Remove several low secondary stems which are damaging the boundary fence 8. Elder - Pollard at a height of 3m

T1 Cypress - Trim back in line with the handrail to a height of 3m T3a Sycamore - Prune to clear roof by 2m T5 Sycamore - Remove major deadwood T23 Beech - Crown lift/prune back on north side of the canopy, upto 3m T25 Laurel X 2 - Reduce height to 1m and trim sides to shape

Cut back and trim hedge to north of property, trim and tidy laburnum tree to north of property and remove branches in closest proximity to the property, trim and tidy yew tree to north side of property and remove branches that are overhanging flat roof of property, remove branches of silver birch tree to north of property -Section 211 notice

Large Sycamore tree - 2m reduced from lateral branches overhanging property roof

Crown lift to 2.5m above ground level to garden removing only small, downward tending branches of no more than 30mm dia. Lightly prune small branches in contact with roof of adjacent outbuilding to T1. Yew. Fell T2. T3. And T4. Elder, Crown clean removing dead wood and crossing/rubbing branches to T5. Paulownia tormentosa, Fell T6. Rowan, Crown clean removing dead wood and some crossing and rubbing branches to T7. Cercidiphyllum japonicum, Fell T8. Elder, Coppice and maintain as a shrub to T9. Hazel, Remove 6no. small branches (<10mm) to interior of crown and 1no. 30mm crossing/rubbing branch to east side T10. Maple, Fell T11. Elder, Fell T12. Hawthorn, Coppice secondary stems leaving single, main stem to T13. Hazel, Crown lift to 2.5m on east and south sides to balance crown and provide clearance over garden by removing 6no. branches of no more than 75mm dia. and 5no. small (15mm dia.) downward turning sub-branches to T14. Rowan and Remove water shoots and crown thin by 10% to T15. Apple