Rear Garden: (T1) Magnolia (M.soulangea) - reduce to 30cm below previous cut - remove all dead wood leaving 20% of inner fine furnishings; (T2) Norway Maple (Acer platanoides) - reduce to previous points of reduction - RETAIN rear low branches for screening purposes - remove any deadwood; (T3) Maple (Acer) - reduce crown by 1m from tips - shape sides to match and shape to tidy; Front Garden - (T4) Juneberry (Alemanchier) - reduce crown by 25% to suitable growth points - prune lateral branches to match, shape, balance and tidy - lift by removing selected lowest branches to ensure good clearance over pavement and garage

T1 - Pear - Located to side of property - Leaning onto garage of Thorpe Hall - Due to position would like to Fell.

Ash Tree too close to garage, causing damage to structure - Fell

Sycamore, fell. too close to the garage

T6. Douglas Fir Rear garden Reduce canopy by 25% (2m in height and 2m in lateral spread; balance and shape crown lift over footpath to statutory height. Crown lift over garage roof.

Neighbouring rear garden T1 Laurel x 1 (Prunus spp) This tree is damaging a garage roof. Suggested works: - Lift over garages to give 2m clearance.

Sycamore (T1) - reshape to last pruning points, approx. 4 metres reduction, lift to 2.5 metres above ground level and to provide 2 metres clearance of garage roof - cyclical maintenance.

T5 - Southern Magnolia - Third party tree located in 63 Murray Road - Selective branch removal to prune back away from fence line and allow clearance. Prune back away from front elevation to provide at least 1m clearance to remove contact with first and second floors. T6 - Cherry Laurel - Prune back to boundary to allow clear passage into the existing parking and that to be formed under agreed planning,. T7 - Chinese Privet - Third party tree located in 63 Murray Road - Crown of tree coming into contact with front of the building resulting in an actionable nuisance. Prune back to give 1.5m clearance from elevation. Prune back on side of number 65 by up to 1m leaving a spread to the north east of around 2 to 3m. T17 - Cherry Laurel - Third party tree located in 67 Murray Road- Undertake works to lift crown to a height of 2.5m over existing access road to garage. This will be undertake through selective branch removal and prune back to the boundary. Undertake reduction of remaining crown on side of number 65 (south east side) only by up 2m to bring back in to formal management. T23 - Lawson Cypress - Fell to continue to improve the garden and open up an area for new planting where there are already a number of trees. Tree will be replaced.

T1. Sycamore A: Remove overhanging branches into neighbours garden as per photo. T1. Sycamore A: Even out crown after removal of overhanging into neighbours garden as per photo. Remove dangerous dead branches that are prone to falling. Remove split branches caused by weather. T2. Sycamore B: Crown lift up to 2.5m or 30% of tree height but the resulting pruning wounds will be no greater than 100mm. Remove dangerous dead branches that are prone to falling. Remove split branches caused by weather. T3. Oak: Crown lift up to 2.5m or 30% of tree height but the resulting pruning wounds will be no greater than 100mm. Remove branches overhanging into neighbours garden over garage roof as per photo. Remove split branches caused by weather. T4. Birch A: Top as per photo to prevent further height and stimulate bushy growth. Remove branches overhanging into neighbours garden as per photo. T5. Birch B: Remove branches overhanging into neighbours garden as per photo. T6. Yew: Cut back overhang from neighbours Yew trees, with neighbours consent, as per photo. Trees are overgrowing on this side and fence is pushing over.

Front T1 - Horse Chestnut (Aesculus hippocastinum) Large mature tree with very wide spread crown. The tree has a large stem that has died back on the north side of the tree facing the garage which now may pose a risk. Suggested works are to lessen the branch weight and sail area by reducing and reshaping the crown by 1.5-2m to previous reduction points, cut to suitable growth points and balance crown, cuts diameters not exceeding 50mm. Remove dead wood and lift crown by 1.5m