T1 Elm (dead) - fell to ground level T2 Elm (dead) - fell to ground level T3 Elm (dead) - fell to ground level T4 Elm - Cut back from signs to give 2m clearance and along wall T5, T6, T7 Elm x3 (dead) - fell to ground level T8 Beech - Crown lift to 4m T9 Privet and Elm - cut back to boundary over footpath T10 Privet and Shrubs - cut back to boundary (lime basal) over footpath up to 4m T11 Conifer - cut back selective branches by 2m to clear utilities T12 Cherry - cut back from building by 2m T13 - Conifer - lift to 4m T14 - Willow - Cut back to clear flat roof

There are 3 Lime Trees Numbered no 1. no 2. no 3 on the attached sketch at the back of the block of flats which need pollarding to the level that they were cut to 3 or 4 years ago. This is required because of excessive shading. There are 2 rather straggly Elder Trees Numbered No 4 .No 5. on the attached sketch which are beginning to touch the roof of the Industrial Building the other side of our boundary wall. We would like to cut them back completely and replant more suitable small trees.

T1 - Oak, Quercus robur - located on the LHS of the rear garden, closest to the house. Reduce crown by up to 4m and lift branches away from roof of adjacent shed, creating at least 1m clearance. Remove any dead, dying or dangerous branches above 25mm in diameter. T2 - Ash, Fraxinus excelsior - located on the LHS of the rear garden, adjacent to T1. Reduce crown by up to 4m, (the crowns of T1 and T2 grow together as a single crown). Remove any dead, dying or dangerous branches above 25mm in diameter. T3 - Ash, Fraxinus excelsior - located on the LHS of the rear garden, approximately halfway along the LHS boundary. Reduce crown by up to 4m. Remove any dead, dying or dangerous branches above 25mm in diameter. T4 - Ash, Fraxinus excelsior - located on the LHS of the rear garden, next in line from T3, (following the LHS boundary towards the rear boundary). Reduce crown by up to 3m, sever ivy at base of the tree's trunk, and remove any dead, dying or dangerous branches above 25mm in diameter. T5 - Ash, Fraxinus excelsior - located on the LHS of the rear garden, next in line from T4, (following the LHS boundary towards the rear boundary). Reduce crown by up to 3m. Remove any dead, dying or dangerous branches above 25mm in diameter.

T1-Evergreen Magnolia(M.grandiflora) -reduce crown height by 1.5m to suitable growth points. -reduce all sides to shape, balance and tidy. T2-Magnolia(M.soulangea) -reduce crown by 20%(1m) to suitable growth points to shape to more rounded canopy line. -trim back lateral branch length to match. All above works are for routine maintenance. Below works, are encroaching the roof line of the side wall of the timber shed and roof line. T3-Nearest RH rear boundary next to shed Cypress (Cupressus) -section fell to ground level.