T1 Pine - Fell to improve usability of garden T2 Pine - Remove lowest limb growing over fence to rear reduce spread on house side only by 1-1.5m and shape into remainder of canopy

T1, T2, T3 Ginkgo Biloba - Crown lift on garden/property side to 3.5m to clear building and provide additional clearance over fence line

T1 Eucalyptus - Re Pollard to previous points to be carried out on an ongoing 2-3 year Cycle. T2 Maple - Reduce height to previous points approximately 2 m tall. T3 Prunus - Fell. T4 Hazel - Reduce height to fence height. T5 Prunus - Crown reduce by approximately 1-2 metres. T6 Cherry - Fell. T7 & T8 Quince Crown Reduce by approximately 1 metre. T9 & T10 Holly - Fell. T11 Laurel - Fell.

T1 Large Yew - Remove due to It blocking light, draining the soil of nutrients, pushing the fence between ourselves and our neighbours over and producing a lot of pollen in summer which is causing real problems with allergies. T2 Holly - Lower height of tree

T1 Walnut tree - Cut back to stop future growing over property, pathway and guttering. As branches falling constantly onto property guttering and damaging, now requiring replacement, tree debris blocking downpipes and gutters, making property pathway slippery when accessing the back door and garden. Cut tree as per annotated photo & cut to clear public pathway. T2 Walnut tree located in 10 Adelaide close - Remove tree completely as tree is encroaching and damaging our property fence line. This tree is located very close to our boundary and is now damaging fence line. Constant debris falling all over our garden and patio space and blocking gutters, large branches overhanging both sides of the fence line. After speaking to our neighbour of No.10, we have both agreed that it would be best interests if the tree was removed. The tree is located in a tight space between both properties. The branches now large and overhanging, vehicles and property. The tree is just too big now for the small space it's crammed into. After tree is removed we can then repair our fence line making it safe for both children and pets T3 Walnut tree - Cut tree as per annotated photo leaving at approx 6m (20ft) in height from ground height and raise crown to 2.5m from ground level.

G1 Mixed species trees along/adjacent rear boundary - Remove 4x trees with 7x others being cut back to provide 0.5m clearance from the existing boundary fence to a height of 2m from ground level to allow space for the fence to be replaced due to its failing condition

T1 - group of ~10 small diameter fir trees. Trees are sited on the boundary of properties at 3 Ten Bell Land and 38 Pratt Street, the latter being contained within Soham's Conservation Area. Reduction in height to approximately 1m above the fence line, which would bring it in line with hedge/trees further to the left and approximate location of previous pruning identified by existing cut branches

T1 North most - WALNUT TREE Cut away branches to stop it growing over property & guttering T3 - WALNUT TREE Cut away branches to stop it growing over property & guttering. Sadly applicant believes this tree is dead but would like confirmation of this, tree officer has visited site and the tree is not dead T2 - WALNUT TREE Shave lower side of tree as pushing on fencepost, knocking fence over. Located in garden of 10 Adelaide Close

G1 Mixed Species approx. 35m - Fell to ground level all vegetation and treat to prevent regrowth up to bottom of fence and or hard side back to ensure a 1.5-2m clearance to the road. No trees above 200mm to be removed. These works are requested by milestone for Highway clearance and visibility from the junction.

G1 Laurel, Elder and mixed scrub trees - Remove all to near ground level and remove all arisings from site. Grind out the stumps to prevent any potential regrowth. Stumps to be poisoned where they cannot be ground out due to emanating from hard surfacing or near fence posts, retaining walls or concrete shed bases.