T1 & T2 Holm Oak - Prune back to boundary wall with 24 Egremont Street and to full height (12.0 metres) of tree, to incorporate clearance of television aerial and front guttering.

T1 Walnut tree - Cut back to stop future growing over property, pathway and guttering. As branches falling constantly onto property guttering and damaging, now requiring replacement, tree debris blocking downpipes and gutters, making property pathway slippery when accessing the back door and garden. Cut tree as per annotated photo & cut to clear public pathway. T2 Walnut tree located in 10 Adelaide close - Remove tree completely as tree is encroaching and damaging our property fence line. This tree is located very close to our boundary and is now damaging fence line. Constant debris falling all over our garden and patio space and blocking gutters, large branches overhanging both sides of the fence line. After speaking to our neighbour of No.10, we have both agreed that it would be best interests if the tree was removed. The tree is located in a tight space between both properties. The branches now large and overhanging, vehicles and property. The tree is just too big now for the small space it's crammed into. After tree is removed we can then repair our fence line making it safe for both children and pets T3 Walnut tree - Cut tree as per annotated photo leaving at approx 6m (20ft) in height from ground height and raise crown to 2.5m from ground level.

T1(in red on sketch map) 4 x Plans trees - Re-pollard to previous points T2(in blue of sketch map) 4 x Conifer trees along boundary line - Remove and replace with native trees. They have been reduced previously to remove dead upper tree but have now started to die off further down and very stressed. T3(in black on sketch map) Conifer - Remove as dying T4(in yellow on sketch map) main Conifer - Remove as dying

G1 Group 1 - Mixed Species (green line on map) crown lift to 5.4m above ground level back to the boundary wall. T1 - Horsechestnut (Orange dot on map) Re-pollard lowest limb over road to ensure 5.4m clearance to the road.

G1 2x Horse Chestnuts - Sensitive side prune back to boundary line not removing in excess of 2.5m long lengths of material so as not to change the balance any amenity value of the trees.

Group 1 mixed species - Crown lift all trees to 2.5m and side back to the boundary wall to clear footpath and crown lift to 5.4m over the road. T1 horse chestnut - Crown lift to 5.4m over the road

T2 Sycamore in adjacent garden - Raise canopy by 2m by removal of lowest 2-3 branches. Reduce spread on southwest side only by 2.5m and re-shape into remainder of canopy T3 Horse Chestnut - Reduce height by 2.5m back to previous pruning points. Reduce spread on all sides by 1.5-2m to shape round. Raise canopy above hedgerow by 1.5-2m. remove epicormic growth on main stem T4 2x Yews on boundary - Reduce height by 4m to tie in with hedgerow

101 Lime - Re-pollard 102 Lime - Re-pollard 103 Lime - Coppice to ground level (multi stemmed tree due to prior coppicing, heavy ivy over, almost all of tree is leaning over rear boundary into neighbour's garden) 104 Lime - Re-pollard 105 Lime - Re-pollard 106 Lime - Re-pollard 107 Lime - Re-pollard 108 Sycamore - (twin stemmed as base, smaller of two stems is dead and covered in Ivy) fell dead secondary stem, remove major dead wood. 109 Sycamore - End weight reduce heaviest laterals over garden by 40-50%. 110 Sycamore - Remove heavy limb leaning on boundary wall.

T1 Sycamore - Crown lift tree to 5m from ground level, over north east property boundary and crown spread reduction of 2m over same boundary. T2 Sycamore - Crown lift tree to 5m from ground level, over north east property boundary and crown spread reduction of 2m over same boundary. T3 Sycamore - Crown lift tree to 5m from ground level, over north east property boundary and crown spread reduction of 2m over same boundary. T4 Sycamore - Crown lift tree to 5m from ground level, over north east property boundary and crown spread reduction of 2m over same boundary.

G1 - Group of trees on boundary, Pine, Larch & Conifer - Crown lift trees back to boundary fence, from Number 39 Selwyn Close, to give max 6m clearance from ground level with no cuts to be in excess of 5cm diameter.