T1 Norway Maple - Fell due to proximity to the building T2 Ceanothus - Reduce spread on house side by 2.5-3m. Reduce height by 2m and shape round T3 Cherry - Reduce spread on all sides by 1-1.5m to clear building and shape round T4 Norway Maple - Reduce height by 2.5m. Reduce spread on all sides by up to 2m and shape round T5 Norway Maple - Reduce longest growths on all sides by up to 1.5m to shape current imbalanced canopy T6 Ceanothus - Reduce height and spread on all sides by 1.5m and shape round

T1 Ash - Fell. Tree is on edge of drive growing very close and overhanging the house.

T1 Beech - Cut back spread on house side above conservatory by approximately 3 - 3.5m. Raise to clear roof by approximately 1.5m, taper into remainder of canopy to shape T2 Ash - Cut back above conservatory by approximately 2.5m T4 Eucalyptus - Fell

T1 Walnut - Reduce crown by 2 - 2.5m back to previous points T2 Holly (@ 5 Barton Road) - Trim back lateral growth by 1 - 1.5m to reduce overhang and re-shape T3 Birch - Reduce crown to clear edge of house by 1 - 1.5m

T1 Walnut - Remove 2x lowest limbs over road. Reduce limb growing towards house as per the annotated photograph. T2 Pear - Crown lift to 3m from ground level and prune to clear the building by 1.5-2m. T3 Sycamore - Reduce to previous points as part of ongoing tree management to aid retention. G1 2x Sycamore - Fell - Trees in corner of garden are causing a nuisance and are in close proximity to buildings

T1 Pear - Remove as to close to house (100mm) at base T2 Mulberry - Pollard to 3m to allow adjacent trees light and control size of tree

T1 Blue Cypress - Fell due to roots damaging driveway and excessive shading to the house

1. Elm trees x2 - Fell to ground level as dead / dying. Due to Dutch Elm Disease and being roadside. 2. Walnut tree - Reduce lateral branches overhanging the road and garden/house by 4m. and 3m respectively. This tree is significantly overhanging both the road and the domestic property proposed pruning to mitigate these risks and to retain a balanced shape to the tree. 3. Sycamore - Remove two lower branches, one of which has suffered damage from passing vehicles, to reduce road overhang, mitigate safety concerns and vehicular damage risk. 4. Silver Birch - Remove three lower branches to reduce road overhang, mitigate safety concerns and vehicular damage risk. 5. Cherry Laurel - Reduce the height to 2.5m in order to reduce excessive garden shading and risk from branches being shed. 6. Prunus x2 - Pollard to 3.5m. One of these two trees lost a significant branch earlier in 2022 and the tree has suffered a significant split at a height of 4.0m which is likely to cause further branches to fail. The second tree to be pollarded to match. 7. Conifer - Removal to ground level. 8. Ash - Remove a lower limb/fork which, is considered at risk of cleaving with consequent splitting of the remainder of the trunk, potentially allowing disease to infect the remainder, as well as to reduce excessive shading. If this limb were to fall it would destroy a garden shed as well as damaging other trees/shrubs beneath. In addition, reduce the crown height by 6m (cutting to growth points) as well as removal of laterals which are significantly overhanging the neighbouring property.

T1 - Conifer by summer house - reduce by 3m and hard trim on sides T2 - Yew by summer house - reduce by 3m and hard trim on sides T3 - Trim and shape Holly into a dome T4 - Remove 3 x Laburnum limbs blocking view of Cathedral T5 - Coppice Philadelphia at base T6 - Trim and shape Yew column T7 - Remove Limb from Peach over hanging solar panels T8 - Fig shape and remove crossing limbs (clean lower crown) T9 - Reduce (1m) and shape Magnolia to similar height to Fig T10 - Mulberry - Crown reduce by 3m

G1 Silver Birch, Holly Tree, False Acacia - Cut down to clear space for summer house/shed