Oak tree approx. 7m to north of house - reduce the canopy on the south and east sides where it overhangs the dwelling and driveway respectively by up to 2-3m, pruning back branches to suitable growth points to accord with BS3998 2010 Tree Work Recommendations and good arboricultural practice

1. Crown lift to the statutory height over the highway (5.2m) 2. Reduce crown spread on the south side by approx. 1.5m or to the previous pruning points to reduce encroachment on the dwelling. 3. Withdraw the element for an overall crown reduction 4. Crown lift by shortening pendulous branches over the seating area to 2m, if desired

T1, Copper Beech : approximately 20 metres high, reduce height by 2 metres as concerned about proximity to our boundary wall with neighbours, possible damage. T2, Ash: Fell showing signs of ash dieback also situated on our boundary wall with neighbours, concerned about possible damage. T3, Copper Beech: Approximately 20 metres high, reduce by 2 metres; reduction due to proximitiy to our dwelling and takes full south westerly prevailing winds. T4, Ash: Fell, showing signs of ash dieback and in striking distance of dwelling.

T1, Sycamore: Fell T2, Sycamore: AMENDED SPECIFICATION No works T3, Sycamore: AMENDED SPECIFICATION Reduce lateral branch growing towards dwelling by up to 3m making a single pruning cut of up to 75mm in diameter.

T1, Cedar of Lebanon : Reduce south eastern limb away from building by 1.5m, leaving adequate 2.5m - 3.0m clearance from building. Maximum diameter cut 65mm Reason for works: Portion of south-eastern canopy is within 0.5m of dwelling to the south, pruning away from property to gain a more sufficient clearance. Pruning works are considered minor works and not detrimental to the overall health to the tree.

Variation of conditions 2 (approved plans), 5 (landscaping), 9 (parking layout) and 11(tree protection measures) of application 12/2118/FUL (Construction of 6no. dwellings and separation of annexe to create 7th dwelling) to reflect variations to approved design and site layout relating to parking and cycle/refuse storage.

T1, Sycamore : 360 degree 2 metre crown reduction to ensure tree no longer interferes with neighbouring dwelling

T1, Walnut : Reduce eastern aspect by 3m away from new dwelling, MDC 50mm; crown raise to 2.5m above ground level, MDC 25mm; remove major deadwood Reason for works: To reduce over dominance over small garden, appropriate arboricultural management

T7) Beech tree : Distal die back present, tertiary and some secondary branches are dead. Remove deadwood throughout the crown. To prevent branches falling on pedestrian footpath below. G43) Group of Beech and Cherry trees: Remove dead stem leaning towards the dwelling. To remove hazard. T15) Oak tree: Branching is crown biased towards the house. Fungal mycelium found. Armillaria decay on root crown. Reduce crown by 2 meters height and 2.5 meters radial spread to North, East and South. Reduction works to mitigate the loss of structural wood in stem base and root system. T16) Sweet Chestnut: Minor deadwood in crown . Small faulted branch over the internal access road: Remove faulted branch over the road to mitigate hazard. T24) Beech : Die back of tertiary branches in upper crown. Minor deadwood abundant in distal portion of upper crown: Leaning weak fork: Reduce by 4 meters to remove upper crown: Remove risk to parked cars below tree and adjacent to access roads. T28) Sweet Chestnut: Dead tree: Fell T29) Oak: Split branch and large dead branches over the road: Remove split branch and remove dead branches: Remove hazard to cars/public below tree. T33) Oak: Weak fork between primary stems: Reduce height and spread by 2 meters. To mitigate loss of structural branches. G44) Group of seven Scots Pines: Exposed crowns: Reduce North East and South side by 2.5 meters and height by 2 meters: To prevent wind throw. G45) Group of 3 Sweet Chestnut: Remove faulted and dead branches throughout the group. Reduce radial crown spread to the east over the car park by 2 meters. Crowns extend over the access road and utility wires. To mitigate branch loss on public/cars below and maintain health and safety of trees.

G1 is a group of semi mature sycamore (Acer pseudoplatanus) a reduction of between 3 and 4m and to thin the canopy by 10% to remove deadwood and allow a more open canopy structure reducing wind throw. T1 Ash (Fraxinus excelsior) showing early onset signs of ADB. - Fell T2 Ash (Fraxinus Excelsior) showing early onset signs of ADB. - fell . G2 group of 6 Sycamore (Acer pseudoplatanus) reduction by 3 to 4m and a thin of 10%. G3 a group of bay and holly reduction in height to achieve a uniform height and separation between G3 and G1+ G2 and a thin by 15% to increase light levels in the garden. T3 +T4 , T5 Sycamore Fell G4 + G5 Group of Sycamore reduction to gain 5m clearance of the dwelling