Certificate of existing lawfulness application to demonstrate the use of shed structure as donkey house and the use of the remainder of property for grazing.

External alterations to convert a two storey wagon shed to a home office and a single storey potting shed to a changing room; construction of a swimming pool, and construction of an outside kitchen

Variation of condition 2 (approved plans) of planning permission 20/1838/MFUL (Demolition of existing buildings and the residential development of 33 new homes in a mix of 10 no. dwellings and 19 apartments and the conversion and refurbishment of Eldin House to create 4 apartments, partial demolition of potting shed and greenhouse and extensions to create dwelling, together with vehicle and pedestrian accesses, landscaping and associated infrastructure) to allow design changes to the approved apartment block which include changes to balconies, window position and alignments and the addition of a lift overrun to the roof and the approved dwellings which include internal layout changes, the addition of porches, changes to window positions and design.

Erection of a lean-to shed to the side of house.

T1, Crab apple on west boundary near back door between log store and garden shed : cut to ground due to outgrowing the space. T2, Pittosporum on western boundary approximately level with front of house : crown reduced to 16 feet (24 feet at time of applying). Reason is to prevent crown getting too leggy and sparse

T1 - Larch crown lift removing 4 lowest branches, 7 metre max length max diameter 15cm T2/T3 - 2 x Oaks crown lift by 4 metres max maximum cut 15cm diameter length of branch max 5 metres T4 - Oak leaning reduce branch by 10 metres to the vertical branch (see picture) 35cm max diameter cut - Tree is growing with bad form with significant lean. T5 - Pine crown lift remove 2 lower branches back to stem 13 metres long 25cm max diameter T6 - Oak remove 3 lowest branches 6 metres max length 15cm max diameter Reason (all above) - Safety to give clearance from ground for users of the garden T7 - Beech remove all smaller branches growing on shed and growing towards house 10 metres length 15cm diameter - Reason - to prevent damage to house and shed and to prevent repetitive pruning work.

T1, Ash : lift branches above shed and garage to give 2m clearance; reduce lowest limb and branch above to give 2m clearance above garage; reduce lowest two branches above patio to give clearance; trim back marked growth on picture 3 to give clearance from roof of house; remove base epicormic (no cuts to exceed 100mm diameter) T2, Oak : remove epicormic growth from stem; crown lift lower limbs to a height of 5m from garden of 29 Brand Road; crown lift to 8m from 21 Gronan Close to balance the canopy (21 is lower, so therefore 8m to balance the lower canopy)

Removal of timber shed and green house, extension to garage and new study.

T1, Oak : Crown reduce by no more than 1.5m as per the below picture ensuring the tree retains a balanced and uniform shape; maximum diameter of cuts 60mm; reduce crown back from house ensuring 2.5m clearance; prune over fence and shed to achieve 1m clearance where possible; remove all stubs back to appropriate pruning point and remove all deadwood. Reason: Appropriate Arb Management.

Conversion of outbuilding to home office. Removal of adjacent chicken shed and replacement with extension to home office.