T1: Oak - raise crown over the gardens up to a height of 5m from ground level. Remove limb growing on eastern side. Reduce crown by up to 2m to leave a tree with a finished height of 8m and a 3m gap from the house. Restricting cut size to 75mm diameter.

Horse chestnut reduction - Reduce by 2m only on the east side of the tree leaning over the roof of the house. Cut to suitable growth points to preserve health and form of the tree, thinning and dead wooding will also be carried out where necessary.

T1, Oak : reduce north and eastern aspect by 2m, maximum diameter of cut (MDC) 25mm; remove major hazardous deadwood. T2, Beech : reduce northern aspect by 2m, reduce 1x limb growing north east by 2.5m, MDC 25mm T3, Beech : reduce northern aspect by 2.5m, remove crossing limb on southern aspect back to source, remove limb growing west back to source, MDC 50mm. Remove major hazardous deadwood. T4, Oak : reduce northern aspect by 2m, MDC 40mm; remove major hazardous deadwood overhanging Burwood House only, inspect upper portion of northern canopy and remove snapped branch if appropriate. T5, Beech : reduce northern aspect by up to 2m, MDC 25mm. T6, Tulip Tree : remove northern stem back to source near ground level and crown reduce southern stem by 3m in height and lateral spread by 1.5m.

T1: Oak - reduce crown by approximately 2.5 - 3m to previous pruning points, maximum diameter cuts 50mm. Create approximately 1.5m of clearance from house.

G1 - Beech trees: 1) stems nearest the house - crown lift to a height equivalent to the eaves of the house, removing small branches up to approx. 25mm in diameter. 2) reduction of lateral canopy extent over the garden on the south side by up to 2-3m, maximum diameter cuts of 45mm. 3) Height reduction by up to 2m, maximum diameter cuts of 45mm. G2 - beech trees: 1) crown lift above access road to approximately 5m for vehicle access. 2) remove stems directly opposite oak tree to allow more space for vehiclular acess. 3) thin out stems 138mm in diameter at chest height and remove stems up to 200mm at chest height.

T1, Oak: Remove approximately 30% of the foliage area of the tree by via thinning. This pruning should be achieved by: - reduce lowest limb growing towards house by 4m, back to the two side branches making a 175mm diameter pruning cut; - prune back branch over topping lowest branch growing towards house to prevent shading of lower branch; - prune remainder of crown by reduction via thinning, seeking to removing 25-35% of overall foliage area; - pruning to target most heavily extended and laterally growing branches by removing 3-6m branch sections making pruning cuts of around 100mm in diameter.

T1: Reduce canopy spread on east side by up to 2m, where it encroaches on the house, & reduce the overall height of the tree by approx. 3m. T2: Lowest short branch that overhangs the garden - retain. 2nd lowest extended branch over the garden - reduce by approx. 4m to a suitable growth point or side branch. T3: Oak : reduce the whole leader by 3-4m.

1867 Smooth Japanese Maple - Maintain 1m clearance from house by regular light pruning. 1870 Western Hemlock - Prune canopy to give 2m linear clearance to Hazel. 1878 Blue Atlas Cedar - Crown reduction of longest lateral branches by 2-4m in length. 1885 Wellingtonia - Shorten low branch to west by 2m to edge of parking bay making pruning cuts up to 50mm in diameter. 1887 Western Red Cedar - Crown raise to give 2m clearance above ground level making pruning cuts up to 30mm in diameter. Lawson Cypress in G3 - Fell. G4 Lawson Cypress; Western red Cedar - Prune back to give 1.5m linear clearance to lodge making pruning cuts up to 40mm in diameter.

T1: Oak - reduce side lateral limbs to give approximately 3m clearance to house and to reduce overhang of room. Reduce 3 lowest limbs, at same height, reducing by approximately 2m lengths, diameter cuts of up to 7cm. Reduce tips of limbs above by approximately 1.5m with diameter cuts of 5cm. T2: Oak - reduce 2 lowest over-extending limbs by 2m with cut diameters of up to 6cm. T3: Oak - reduction of small lowest limb by 20mm; cut diameters up to 50mm.

T1, Willow: 1/3 or 4 metre height of crown reduction. T2, Pittosporum: 1/3 or 3 metre height of crown reduction. T3, Conifer: removal. T4, Yew: Crown reduction of approximately 2 metres and removal of branches over neighbouring property (Mountfield House).