T1, Holm Oak : crown lift over garage by removing first 4 secondary branches from limb over roof.

T1, Oak : Reduce southern aspect of tree that overhangs 'Copper Glow' by approximately 3m, to appropriate growth points 1m to the north of the apex of garage roof; maximum diameter of cut 80mm.

T1, Ash : lift branches above shed and garage to give 2m clearance; reduce lowest limb and branch above to give 2m clearance above garage; reduce lowest two branches above patio to give clearance; trim back marked growth on picture 3 to give clearance from roof of house; remove base epicormic (no cuts to exceed 100mm diameter) T2, Oak : remove epicormic growth from stem; crown lift lower limbs to a height of 5m from garden of 29 Brand Road; crown lift to 8m from 21 Gronan Close to balance the canopy (21 is lower, so therefore 8m to balance the lower canopy)

T1 (012400) English Oak Adjacent to no 12 : Reduce limb growing over roof by 2.5m; prune the upper crown back to about 0.5m behind fence (grass side) T1 (97024) English Oak Adjacent to no 15 : Prune to give 2.5m / 3m clearance from house; crown lift over fence and garage to achieve 1 - 1.5m clearance. Reason: Appropriate arboricultural maintenance to ensure long-term clearance.

T1, triple stemmed beech in neighbouring property Broad Oak Lodge - stem on Moondara side of the tree. Shorten back first and second order branches by 1 - 2m to a suitable side branch. Remove low branches to clear 2.5m from ground level and cut back second order branches over garage to clear roof by 2m. Reason to prevent damage to garage roof and give better access beneath the tree.

1/. Sycamore - overhanging garage - crown reduction 2/. Ash - Shading garden and hanging onto lawn, plus lounge window - crown lifting 3/. Ash - Hanging onto bungalow roof, causing blockage to downpipe - crown reduction (partial) 4/. Birch - Preventing light entering kitchen window and door - crown reduction (partial) 5/. Ash - Overhanging bungalow roof and blocking light to rear kitchen window plus blockage to downpipe - crown reduction (partial)

Beech tree : Prune lowest two branches touching the roof of the adjacent garage to achieve two metre clearance. Reason : In the interests of visual amenity and to ensure the garage roof is not damaged

Cherry raise the crown by removing the branches (all less than c 75mm diameter) to gain 1.5m clearance of the garage roof. This will leave a slightly unbalanced crown and it is proposed to cut back the limbs on the northeast side of the tree (up to around 125mm diameter). This should leave the tree with around 5m of clear stem.

T1 - 1 x Silver Birch tree to reduce back branches from overhanging the garage roof thinning the crown by less than 20% of the folia area making natural target pruning cuts of less than 20 mm. in diameter pruning branch lengths of less than 1 m. T2 - 1 x Silver Birch tree to reduce in height to the same height as T1 also reducing back branches overhanging the garage roof thinning by less than 20% the folia area the crown of this tree making natural target pruning cuts of less than 20 mm. in diameter pruning branch lengths of less than 3 m. making 1 pruning cut less than 50 mm. in diameter. T3 - 1 x Silver Birch tree to be reduced in height to the same height as T4 (a smaller Silver Birch tree) also thinning by less than 20% of the folia area the crown of this tree making natural target pruning cuts of less than 20 mm. in diameter and removing branch lengths of less than 3 m. T4 - 1 x Silver Birch tree to prune all branches growing towards the parking area making natural target pruning cuts of less than 10 mm. removing branch lengths of less than 0.5 m. Reasons for the works to maintain amenity value and existing size of the trees to prevent damage to any parked cars and for public safety.

T1 Monterey Pine (P1) : Remove limb growing over house roof see photo 1, there no suitable growth points for a reduction of this limb. (P2) : Cut back limb growing over the green house to suitable growth point photo 2. (P3) :shorten branches growing over the garage to give a 3 meter clearance Photo 3. (P4) : Remove smaller diameter branch growing towards the roof photo 4 there Is no suitable growth point for a reduction . Shorten branches growing over the roof back to suitable growth points to give approximately a 3 meter clearance.