T1: Oak - pruning of two minor, lowest limbs on the south side of the canopy which are encroaching on the neighbouring garage roof; max. length of cut 2m and max. dia. cut 4cm.

T1, Walnut : Raise crown over garage roof to give 1.5m clearance. T2, Sycamore : Fell

T14, Western Red Cedar: Reduce height of overhanging limb by 3m and trim base foliage to give 1.5m height clearance above the fence and shed roof. T23, Western Red Cedar: Reduce to give 1.5m height clearance above shed roof.

T1, Beech tree : To prune back all the branches which are growing towards and touching the gable wall and roof of the last property of Ernsborough Gardens making natural target pruning cuts of up to 50 mm in diameter and removing 2m; branch lengths to give clearance to the property. T2, Beech tree : To prune back 1 x branch reducing the end weight and leverage of this branch and to improve aesthetics making 1 cut of 50 mm in diameter and removing 2m branch length. T3, Cherry tree : To prune back to give a half a metre clearance inside the boundary wall reducing the end weight and leverage of all branches making natural target pruning cuts of up 40 mm in diameter. T4, Holly tree : To prune back to give a half a metre clearance inside the boundary wall reducing the end weight and leverage of all branches making natural target pruning cuts of up 50 mm in diameter. D1, Dead Maple tree : To dismantle this tree to ground level. D2, Dead Yew tree : To dismantle this tree to ground level. Reason for works : To maintain public highway safety and to improve the aesthetics of the trees and to prevent future damage to neighbouring properties.

Sycamore (T1) : selectively reduce and thin cluster of secondary branches on east side of main stem to provide clearance of neighbouring roof and guttering; reduction cuts no longer than 2 metres with a maximum diameter of 50mm; thinning cuts no greater than 75mm diameter with a maximum length of 3 metres. Works will balance lower canopy.

T1 Oak. Trim crown by up to 2m to shape. T2 Robinia. Remove first branch. Cut back from chimney and roof to give 1-2m clearance.

T1, Red Oak : shorten back second order branches over roof by 2m to a suitable side branch to leave a natural form; shorten back remaining side branches by a similar amount to leave a radial spread of approximately 8m; remove dead wood over 75mm.

T1, Eucalyptus : Pollard down to roof height

T1, weeping beech - shorten side second and third order branches by 1.5m to clear roof by 3m and over drive and hedge to give clearance of 2.5m with no cuts larger than 75mm.

3 trees in question to be removed tree species unknown but a common garden tree Tree one to be felled as too close to the house and interferring with the roof of the house and access into the back door Tree two to be felled as causing excessive shading for both the owner and neighbours and is a tree inappropriately planted as too tall for the garden itself Tree Three to be felled as tree inappropriately planted as too tall for the garden itself