Cherry raise the crown by removing the branches (all less than c 75mm diameter) to gain 1.5m clearance of the garage roof. This will leave a slightly unbalanced crown and it is proposed to cut back the limbs on the northeast side of the tree (up to around 125mm diameter). This should leave the tree with around 5m of clear stem.

T1 - 1 x Silver Birch tree to reduce back branches from overhanging the garage roof thinning the crown by less than 20% of the folia area making natural target pruning cuts of less than 20 mm. in diameter pruning branch lengths of less than 1 m. T2 - 1 x Silver Birch tree to reduce in height to the same height as T1 also reducing back branches overhanging the garage roof thinning by less than 20% the folia area the crown of this tree making natural target pruning cuts of less than 20 mm. in diameter pruning branch lengths of less than 3 m. making 1 pruning cut less than 50 mm. in diameter. T3 - 1 x Silver Birch tree to be reduced in height to the same height as T4 (a smaller Silver Birch tree) also thinning by less than 20% of the folia area the crown of this tree making natural target pruning cuts of less than 20 mm. in diameter and removing branch lengths of less than 3 m. T4 - 1 x Silver Birch tree to prune all branches growing towards the parking area making natural target pruning cuts of less than 10 mm. removing branch lengths of less than 0.5 m. Reasons for the works to maintain amenity value and existing size of the trees to prevent damage to any parked cars and for public safety.

T1 Monterey Pine (P1) : Remove limb growing over house roof see photo 1, there no suitable growth points for a reduction of this limb. (P2) : Cut back limb growing over the green house to suitable growth point photo 2. (P3) :shorten branches growing over the garage to give a 3 meter clearance Photo 3. (P4) : Remove smaller diameter branch growing towards the roof photo 4 there Is no suitable growth point for a reduction . Shorten branches growing over the roof back to suitable growth points to give approximately a 3 meter clearance.

T1 - To prune the crown of 1 x Oak tree by approximately 20% crown reduction via thinning, removing branch lengths of approximately 3 m. making natural target pruning cuts of up to 50 mm. in diameter thus reducing the end weight and lever arm of all branches maintaining the trees health and safety and periodic maintenance as this tree is a lapsed pollarded tree. T2 - To prune the crown of 1 x Oak tree by approximately 20% crown reduction via thinning removing branch lengths of up to 3 m. in length and making natural target pruning cuts of up to 50 mm. in diameter and a further 2 cuts of branches up to 75 mm. diameter which are growing over the garage roof of 8 Matthews Close, stripping the Ivy from this tree to enable future visual tree assessments and reducing the end weight and lever arm of all branches maintaining the trees health and safety and periodic maintainence as this tree is a lapsed pollarded tree.

Ash A3, concerning the neighbour we will reduce the volume of the secondary branched off the two horizontal branches overhanging the neighbour (the ones with the holes in the end) Anything else will be subject to inspection and reporting by the tree surgeon. Ash A2, the group of big self-seeded saplings against the wall, we will remove and replace at the top of the bank with some flowering fruit trees or possibly a Monterey Pine. Scots Pine SP4, we will remove the upper deadwood to above the lower remaining live branch. We will replace with Monterey Pine. Sycamore S22, we will remove the remaining trunk at a point above the woodpecker hole adjacent to where the adjacent trunk/bough broke 2 years ago due to rot. Sycamore 8, a group of 15/20 year old trees we will remove the smaller one to benefit the others and adjacent Blackthorn. Sycamore 18, the smallest of the stand, we will remove to benefit the adjacent Ash and other Sycamores. Horse Chestnut HC1 and Copper Beech CB1, we will cut back branches touching the garage roof and house. Other trees will have basic maintenance removing dead wood etc. Trees along the drive will also have lower branches removed to give 4m headroom for trucks. In addition we will remove the overgrown Leylandii hedge between the cabin and the garage to give light to Blackthorn and field hedge trees.

T5 Field Maple - Crown raise over garage to give 3m clearance, MDC 50mm The garage roof is extremely overshadowed by tree, needs more light and air flow once Ivy has been removed

T28 Oak Remove first two branches property side. T47a Cypress Remove first two branches over garage roof