1 - Magnolia - Cut down and remove root. Large tree over 8m x 8m. The branches spread up to the house and restrict access to back door. It is far too big for its position near the house. Mature height 9m. 2 - Yew Tree - Cut down and remove root. It is 7.2m x 2m tall, near the house and blocking light bedroom and kitchen windows. Mature height 12m. 3 - Sitka Spruce Tree - Cut down and remove root. This is a large tree which is only going to grow more. It is within 1.5m of the house. We have a raised bump in the kitchen floor which may be a root from the tree. Generally we feel this is too near the house and is affecting the foundations. Mature height 18m. 4 - Leyandi Cypress- Cut down and remove root. Medium sized tree 6m x 2m. This is in the wrong place and will grow up 20m. We wish to use this space by the fence to plant shrubs and a herbaceous border. Our house grade 2 listed built in 1600's so the foundations are not deep so our concern is that large mature trees could affect the foundations. We also are keen to increase the light into the house as the large trees are blocking the light as shown in the photos provided. We hope to replant the area with shrubs and herbs in keeping with the house.

Change of use from dwelling house (Class C3) to assisted living care home for three children with staff facilities (Class C2), and proposed works for vehicle access alteration, parking provision and boundary fencing.

Non material amendment to allow for two new parking spaces increased from 5.5m at centre to 5.5m on short side, fences moved accordingly, to comply with Highways standards pursuant to NE/22/00168/FUL - Demolition of existing summer house and erection of 2 bed end terraced house

Installation of Electric Vehicle Charging point for a car. This would be mounted on the back of the fence/gate post (not attached to the house or visible from the front of the property). Minimal cable run - As electric box is at same rear corner of the house and cable would run down at floor level.

Installation of Electric Vehicle Charging point for a car. This would be mounted on the back of the fence/gate post (not attached to the house or visible from the front of the property). Minimal cable run - As electric box is at same rear corner of the house and cable would run down at floor level.

Non material amendment pursuant to planning permission 19/01244/FUL dated 10.9.19 Erection of three dwellings pursuant to outline permission 15/00548/OUT (part retrospective) Ash Pole House - render colour change from White to "Old White", and Thermowood Rainscreen change form Sikkens Oak stain finish to Osmo Pebble Grey. Hill Top House change Hardie Plank from Arctic White to Pearl Grey. Remove rendered panel and replace with Thermowood Shiplap boarding in Dark Grey.Fencing - change from Forest Products Kyoto fence panels to generally 1.8m high close boarded on timber cant rails & posts, with nominal 1.2m high in front garden diving areas. Patios/paving Ringdale House - Silver Grey granite rather than "dark". Ash Pole House - Sawn Grey sandstone rather than "light". Hill Top House - Kandla Grey sandstone rather than "dark".

Variation of condition 3 to allow for revised plans that reflect the completed works on site pursuant to 19/01534/FUL Alterations to existing bay window with detached covered carport and Fence. Internal alterations and modernisation to mill house Brigstock Condition 3 - Due to construction methods the roof has been modified, patio line has been altered and the fence height raised to accommodate raising site ground levels.

To carry out crown lifting/raising work to T1 the sycamore tree, by removing entirely the lowest primary branch growing towards the house, in combination with the lowest two branches growing in the opposite direction towards the garden fence boundary fence with 3 Grange Road. T2, and T3, both ash, to be removed.