Non-Material Amendment of DC/22/4489/FUL - Proposed erection of detached domestic garage and store - Due to the slightly falling ground levels northwards, they would like to 'step-down' both the finished floor level and corresponding roof element of the workshop/store element by 450mm. To improve natural lighting within the same workshop/store element, they would like to introduce a 600mm wide by 1000mm high obscure glazed window opening within the eastern side elevation, with the previously proposed roof-light within the eastern boundary plane of the roof-slope removed.

Non Material Amendment of DC/18/4866/FUL - Demolition of existing outbuilding & garage. Erection of new dwelling (comprising basement and room-in-roof levels) with integral parking and widened vehicle access crossover at land to rear of Barclays Bank, 177 High Street, Aldeburgh - Retention of existing bank vault to 177 High Street - Landscaping amended - North boundary wall to be reinstated

Non Material amendment of DC/22/2663/FUL - Rear single storey extension, proposed new porch and entrance, front first floor extension over existing garages, associated internal works, proposed new double garage to front driveway and renewal of boundary wall to front driveway - Render finish to replace brick work to rear single storey, new porch and detached garage

Non-Material Amendment of DC/21/4971/FUL - To Demolish a single-storey side addition and replace this with a new single storey side entrance, a two-storey rear extension, and internal alterations. Erect a single detached garage to the side and upgrade the boundary fence. The existing front door is replaced with a window. Existing steps to the front door is omitted, pedestrian access is moved to be in line with the new side entrance

Non Material Amendment on DC/20/5210/FUL - New dwelling and garage. Amendments are as follows. 1 - Lounge window cills lowered to be 450mm off of FFL 2 - Dining room side window changed to french doors 3 - York Stone headers and cills to all front windows 4 - Flue to side of house in dining area 5 - Boundary wall between new house and the rosary to be made of brick piers with wood fence panel between -1200mm height fence. 6 - Building foot print handed from approved. 7 - Two storey rear element dropped to single storey. 8 - Measurements from boundary shown.

Non-Material Amendment of DC/17/5014/VOC - Extension and alteration to existing dwelling including cartlodge. Changes to garage elevation roof and amendments to landscaping/boundary fences/gates

Non Material Amendment DC/19/1637/FUL - 1. In outline, comprising a Visitor Centre (maximum 2,000sq.m GEA) and a maximum of 9,500sq.m (GEA) of floorspace to provide administration, storage, welfare and canteen facilities with all matters reserved apart from access. 2. In full, for the demolition of the existing Outage Store, Laydown Area, Operations Training Centre, Technical Training Facility, Visitor Centre, and Rosery Cottage garage; removal of technical training and pool car park (63 spaces), Coronation Wood car park (21 spaces), Visitor Centre car park (16 spaces) and northern outage car park (576 spaces); meantime use of the Technical Training Centre as an interim Visitor Centre followed by its demolition; and erection of new (all floorspace in GEA) Outage Store (2,778sq.m), Laydown Area (11,990sq.m) including New Western Access Road, Yardman's Office (23sq.m), Training Centre (4,032sq.m), Rosery Cottage garage (30sq.m), Replacement Car Park (2,363sq.m) providing 112 spaces, and Outage Car Park (15,525sq.m) providing (576 spaces) including new access road (and alternative access to bridleway), footpath and amended junction at Sizewell Gap; and associated landscaping earthworks/recontouring, tree felling and boundary treatment.

Non Material Amendment of DC/20/0129/FUL - Replacement rear extension, replacement garage and workshop, remove conservatory and proposed alteration to elevations and front boundary - 1 - Change metal fencing on front boundary to feather edge fencing and laurel hedging. 2 - Change front door design to new style as shown on drawing. 3 - Replace existing render with better suited render. 4 - Change driveway surface.