Construction of a stand-alone shed for the purpose of timber drying and storage of timber, kayaks and garden equipment. The shed is rectangular in plan, 8.0 m by 3.0 m, with a pitched roof, overall height 2.97 m. In the interests of sustainability and economy, it will reuse the roof tiles and A-frames from an old garage elsewhere on the site, due for demolition. The roof is supported on timber columns. The timber columns and timber edging to the roof are painted black. The proposal includes continuing an 800 mm high earth bank along the boundary with the road, topped with a hedge.

In the rear grounds:1/erect a new wooden 9x1.5m (lxh) fence and a 2x1m (lxh) extension to an existing picket fence close off an area to assist with child safeguarding.2/ to provide more outdoor storage for church equipment. Add two sheds, 3x3x1.75m and 2.75x2x1.75m (wxdxh). DC/15/3361/FUL and DC/16/1077/AME previously granted permission for outdoor storage and an artificial turf area with associated fencing and hedging in the rear grounds. Note the area stated of 270 square meters in the application is the area of the affected portion of the rear grounds. Permission is required because the grounds lie within a conservation area and form part of a curtilage of a grade 2 listed building (listing is subject to ecclesiastical exemption and is the remit of the trustees). The long fence will provide a physical barrier to people from the street casually entering the rear grounds when we have children outside. It will prevent children straying into the front areas of the grounds where they have easy access to Quay Street. The short picket fence extension will complete the enclosure. Children are on our site from our community parent and child toddler groups and our church services/youth events. The long fence will extend from the rear of the church building to the holly hedging (see#1). It will be mostly hidden from Quay Street and it will be obscured from Crown Place Maltings residents by the 3m high holly hedge. The fence would be of a wooden construction, of a horizontal lattice type (see #2) with a gate on the existing path. The additional storage would be adjacent to the church car park. It will replace the existing compost areas with enclosed storage and add an additional shed next to the existing bike rack. These will be of metal construction and to 1.75m high consistent with the existing shed. Whilst the boundary wall is 1.2m high on our grounds side, there are existing shrubs behind the compost area up to 2m high and these will remain.

A garden shed measuring 6.0m x 3.0m with 2.25m ridge height. Constructed of 7mm shiplap timber on a concrete base. Position shown at Appendix 1 (Boundary Farm Barn Garden Shed Sketch). To be located not less than 1.2m from western boundary shown at Appendix 2 (Ordnance Survey Site Plan 1:1000) Photograph of construction type shown at appendix 3 although intended to be painted black in keeping with Boundary Farm Barn.

1. Erection of boundary fencing, post and two bar rails [as already insitu to the front aspect of property with the reinstatement of the pedestrian traditional wooden entrance and of five bar gate within existing fencing. 2. Formation of gravel parking area with post and bar rail fencing. 3. Construction of traditional barn style shed.

Variation of Conditions: DC/16/2930/ARM Date of Decision: 23/08/2016 - Approval of Reserved Matters of DC/13/0680/OUT- Outline Application including access, layout and scale Construction of a new detached house with integral garage- Approval of appearance and landscaping of detached house. Condition Number(s): 4- 5- Conditions(s) Removal: Condition 4- Materials: Brickwork Bijou Red Multi brick by WienerBerger (as revised drawing). Condition 4- Materials: Roof coverings Grey concrete Slate SL8 by Forticrete (as revised drawing). Condition 5- Parking, maneuvering and cycle storage. Gravel drive with access path leading from front boundary to front porch. Parking/turning areas and space as shown on revised drawing. Timber shed to rear garden for cycle store as shown on revised drawing. N/a.