Two storey extension over the existing flat roof living room (this was the original single garage extension onto the side of the house)

Removal of temporary canvas building and construction of oak frame garage beside house of 14 Laxfield Way, with roller shutter doors either end, pitched roof in slate tile with two south facing velux roof windows. Clad in Anthracite grey cladding.

To build wooden structure to front of the property on existing garden not to be attached. Garage/storage with solid concrete base a pitch tiled roof with two wooden doors to front entrance and one small door towards the rear facing the house, the building will be built from timber and clad in timber or cement boards which look like timber.

Variation of Condition Nos. 2, 8 and 9 of C08/0494 - Erection of part two storey, three bedroom house with integral garage and storage (resubmission) - Condition 2 - to approve the roof and wall materials proposed as part of this application as per the details now submitted. Condition 8 - substitute drawing number AHD/PL2/01B with drawing now submitted showing parking area drawing number AHD/01. Condition 9 - removal of condition as this application now includes necessary details requested.

Variation of Condition No.2 of DC/22/1087/FUL - Demolition of existing 97sqm 3bed bungalow and construction of 327sqm 4 bedroom bungalow - 1. Garage footprint has been enlarged from 65.95sqm (approved width) to 93.05sqm to house workshop area and larger vehicles. 2. Garage location has been moved and rotated from the approved location further North of the main house and rotated to provide larger turning circle for vehicles. 3. Main corridor internal width has been increased from 1000mm (approved width) to new proposed width of 1500mm 4. Client requirement for Bedroom 2 dressing room has increased external length of bedroom 2 (South elevation) from 7285mm to 9350mm 5. Utility/plant room footprint has been increased to house MVHR, Air source heat pump etc from 6.86sqm (approved area) to 15.08sqm 6. Installation of 12 No solar panels on the garage roof.

Link between house and garage, rear single storey extensions, conversion of garage into cinema room and additional roof light in garage.

Prior Approval Larger Home Extension - 3200mm wide x 4000mm projection single story extension, with full height brick wall to neighbours side and white upvc frames to front and garage side. The roof will be hipped 4 ways, with ridge to centre.

Replace current rotten windows with double glazed sash windows replicating the original style of the property. Replace garage door with a pedestrian door as access to the house. Internally change garage and utility to an entrance hall and kitchen area. One small, brick-built outhouse at rear of property enlarged to provide a utility room and WC. New electrics, plumbing and heating system. Central section of 1920s extension will have dividing interior walls removed to make the rooms bigger for the kitchen area. Across this section, a new zinc flat roof will be put in with a roof lantern. This will not change existing roof height. French doors inserted into brick and flint store looking out into garden (not overlooking any other property). Make opening in front garden (at present a low wall with shrubs) to fit a pedestrian gate so as to offer direct access to the front door of the property

Upgrade and extension to existing house; including improvements to energy performance (replacement windows and increased roof insulation), courtyard infill, new utility/plant room and new garage

Variation of Condition No.2 of DC/20/1703/FUL - Following our recent purchase of 2 acres of land adjacent to our house, we would like to apply to change the use of the land from agricultural to equestrian. A site plan has been attached. We have submitted an application to Suffolk PROW to install a bridleway gate on Bridleway 48 to enclose the grazing horses. We would also like to apply for permission to construct 2 outbuildings in our garden comprising garaging and tractor store (outbuilding 1) and tack & hay store and horse trailer storage (outbuilding 2). Please see enclosed scaled drawings. The buildings will be single-storey, constructed using a traditional timber frame. They will have a plinth of Suffolk brick and be clad in locally-sourced timber. The roof will be lightweight black metal. We have taken care to design a building in keeping with others in the local area. Please see supporting evidence. The buildings comply with the requirement to be 1.8m from the oil tank - I wish to amend the design of 'building 1' to incorporate an office for me above the garage. The reason for this is that since the pandemic, my working pattern has considerably changed, and I now work from home, and we are in need of a space which I can work in, ideally outside of the house, but within the curtilage of the property. I have sketched a new design for building 1, which allows for a space above the garage. The footprint of the building has been reduced from the original design of 74.4 sqm to 53.8. Furthermore I have reduced the 'overhang' section of building 2, in order to reduce the footprint of that building To adjust the variation to reflect that new designs have been submitted. For instance.. The development hereby permitted shall be completed in all respects strictly in accordance with all block plans (Block plan, elevations and floor plans of the proposed buildings) received on 17th March 2022 for which permission is hereby granted or which are subsequently submitted