Erection of two additional floors at roof level in connection with the creation of 2 x 2 bedroom self-contained flats; formation of roof terraces at second and third floor level, installation of new doors and windows to replace the existing doors and windows at ground floor level to the front elevation.

Erection of additional floors at roof level (with 6no solar panels at main roof level) in connection with the creation of 2 x 1 bedroom self-contained flats (1 x 1 bedroom at no. 7 Melbray Mews and 1 x 1 bedroom at no. 5 Melbray Mews); formation of a roof terrace at roof level to no. 7 Mebray Mews.

Erection of an additional floor at roof level to a two storey dwelling house, increasing its height by 2.17 metres from 5.63 metres to 7.8 metres.

Erection of an additional floor at roof level, comprising of 3 x self-contained studio flats, 1 x 1 bedroom self-contained flat and 2 x 2 bedroom self-contained flats; formation of bike and bin stores to the rear of the car park.

Erection of a single storey rear extension to the side and rear of the existing back addition (extending 6.0 metres beyond the rear wall of the original dwellinghouse with a maximum height of 3.2 metres and a maximum eaves height of 3.0 metres), including the installation of 3no. rooflights to the flat roof and double-glazed sliding doors to the rear elevation at ground floor level.

Erection of an additional floor at roof level.

Erection of two additional floors at roof level in connection with the creation of 3 x 1 bedroom and 8 x 2 bedroom self-contained flats with roof terraces at sixth and seventh floor levels; introduction of a lift overrun and re-location of 4no water tanks at roof level.

Erection of a single storey rear extension to the side and rear of the existing back addition (extending 6.0 metres beyond the rear wall of the original dwellinghouse with a maximum height of 3.2 metres and a maximum eaves height of 3.2 metres), including the installation of 1no. fixed clear-glazed rooflight to the flat roof and an aluminium-framed sliding door to the rear elevation at ground floor level.

Removal of the redundant existing steelwork from the rooftop, relocation of 10no existing antenna and 2no existing 0.3m dish antenna from the existing steelwork onto the new steelwork design, installation of 6no antennas, 2no 0.3m dish antenna and 1no GPS Module, a new hooped CAT access ladder to the new support system, a new GRP access platform located next to 1no new ERS Outdoor cabinet, 1no CSC outdoor cabinet and 1no Distribution board at main roof level; replacement of 1no single user to 1no multi user meter cabinet at ground floor level; associated development thereto.

Installation of 6no apertures onto new support poles, RRU's, BOB's & routers mounted on new support poles fixed to plant room walls, GPS modules to be installed on top of Aperture support poles, additional equipment cabinets, 450mm cable trays, fire alarm sounder at high level on outside of plant room, new lighting at roof level together with ancillary development thereto.