Non-material amendment to planning permission reference: 2020/00514/VAR dated 8th July 2020 for the "Variation of Condition 16 (Air Quality) of planning application reference: 2017/02163/FUL, allowed on appeal ref: APP/H5390/W/17/3189578 dated 4th September 2018, for the "Demolition of existing buildings and redevelopment of the site for the erection of a part-four and part five-storey building plus basement to provide 34 residential units, two ground floor retail units (total floorspace 436 sqm) and provision of associated amenity space, car parking, cycle parking and refuse storage." Amendments sought to the wording of Condition 16 to read: "Prior to occupation of the development hereby permitted an Ultra Low Emission Strategy (ULES) for the operational phase of the development in order to mitigate the impact of air pollution shall be submitted to and approved in writing by the Local Planning Authority. The Ultra Low Emission Strategy must detail the remedial action and mitigation measures that will be implemented to protect receptors (e.g. design solutions). This Strategy must make a commitment to implement the mitigation measures that are required to reduce the exposure of poor air quality and to help mitigate the development's air pollution impacts, in particular the emissions of NOx and particulates from on-road vehicle transport by the use of Ultra Low Emission Zone (ULEZ) compliant Vehicles in accordance with the emissions hierarchy (1) Cargo bike (2) Electric Vehicle, (3) Hybrid (non-plug in) Electric Vehicle (HEV), (4) Plug-in Hybrid Electric Vehicle (PHEV), (5) Alternative Fuel e.g. CNG, LPG. A monitoring report of the implementation of the ULES shall be submitted on annual basis to the LPA. Approved details shall be fully implemented prior to the occupation/use of the development and thereafter permanently retained and maintained." Amendments sought are alterations to the shopfront and other minor alterations to facilitate occupation as a retail shop.

Change of use of the basement and ground floor from retail (Class E) into residential (Class C3) in connection with the creation of 1 x 1 bedroom self-contained flat at front part of ground floor, and 1 x 3 bedroom self-contained flat at basement and rear part of ground and first floor level; excavation under the footprint of the existing basement to increase floor height; partial demolition of the ground floor back addition to include the formation of new window and door openings; alterations to existing shopfront to include installation of new glazing to replace the existing.

Change of use of part of ground and basement floor level from retail (Class E) into residential (Class C3); erection of a rear roof extension; erection of a rear extension at second floor level over part of the existing back addition; erection of a single storey rear extension at lower ground floor level to the side of the existing back addition; installation of a new window to replace existing, to the rear elevation at upper ground floor level; installation of a new door to replace the existing window, to the rear elevation at lower ground floor level; erection of bike and bin stores following the demolition of the existing extension, to the rear of rear back addition at lower ground floor level; removal of existing window to the side of rear back addition at upper ground floor level; conversion of third, second, first, upper ground, part of lower ground and basement floor levels to provide 2 x two bedroom and 2 x one bedroom self-contained flats.

Variation of Condition 2 (approved drawings) and Condition 4 (samples of materials) of planning permission reference: 2017/01941/FUL granted 16th October 2017 for the "Demolition of the existing buildings and erection of a new three storey building (4 storey to the rear) for retail use (Class A1) on the ground floor and with 5 x 1 bedroom self contained residential units on the first, second and third floors." Amendments sought include: changes to the layout and access to the flats with the omission of the lift; changes to external materials to the front, rear and side elevations; relocation of proposed cycle store; amendments to the design of the parapet to incorporate a step (accommodating the height difference between the front and rear parts of the building). [Refer to updated plans and information dated 27 February 2020].

Change of use from part retail (Class E) and part residential (Use Class C3) to a standalone casting studio/office (Use Class E) at ground floor level and a two bedroom flat (Use Class C3) above; erection of an additional floor at roof level with solar panels; formation of a roof terrace on top of the existing back addition at second floor level; demolition of existing single storey garage and erection of a part single two storey side and rear extension; installation of air source heat pump to side elevation of back addition; associated landscaping; alterations to the street facing boundary treatment; and erection of bin storage fronting Waldo Road elevation. (Revised description)

Variation of Conditions 2 (Time Limits), 4 (Drawings), 5 (Design Codes and Parameter Plans) and 10 (Gross External Floorspace) of planning permission 2018/02100/COMB granted 8 Feb 2019 (as amended by Non-Material Amendment 2020/01088/NMAT, 15 Jul 2020); 'Planning Application (part-detailed, part-outline) for demolition of existing buildings and structures (excl. No.2 Gasholder, 1856 Chief Engineer's Office, 1927 Research Laboratory, 1920 WW1 War Memorial and WW2 War Memorial) and redevelopment to provide a residential-led mixed use development comprising the erection of new buildings ranging from 1 to 37 storeys. (1) Detailed planning application for residential floorspace together with ancillary residential facilities (C3 Use); flexible commercial floorspace (A1, A2, A3, A4 Uses); community and leisure floorspace (D1/D2 Use); provision of a basement; new pedestrian and vehicular access; provision of amenity space, landscaping, car/cycle parking, refuse storage, energy centre, servicing area, and other associated infrastructure works. (2) Outline planning application (with all matters reserved) for residential floorspace and ancillary residential facilities (C3 Use); non-residential floorspace comprising flexible commercial retail (A1, A2, A3, A4 Uses), office (B1 Use), community (D1 Use) and leisure (D2 Use) floorspace; provision of new basement level; new pedestrian and vehicular access; and associated amenity space, publicly accessible open space, landscaping, car/cycle parking, refuse storage, energy centres, servicing area, and other associated infrastructure works.' Amendments comprise; (a) changes to the phasing programme/phasing order; (b) delivery of a temporary link road to allow for temporary vehicular access to the Site; (c) amendments to the maximum basement parameter; (d) amended service access/egress into the basement to be off Michael Road; and (e) amendments to the permitted shoulder height of Plots E1 and E2 (no change to overall height).

Non-material amendment to planning permission ref: 2019/02756/VAR of which appeal ref: APP/H5390/W/20/3253959 granted 2nd November 2020 for the 'Variation of Condition 2 (approved drawings) of planning permission reference: 2016/02771/FUL dated 15/05/2019 for the "Removal of the existing advertisement hoarding to the front of the site, and demolition of the existing retail storage (Class A1) and car wash buildings (Sui generis) to the rear, and redevelopment of the site to include the erection of a three storey building on the Lillie Road frontage, to provide 2 no. retail units (Class A1) at ground floor and 6no. self-contained flats (2 x studio and 4 x 2 bed) at first and second floor levels, and the erection of a three storey building to the rear of the site to provide 3no. self-contained flats (3 x 2 bed), together with 3 no. off-street car parking spaces (including 1 disabled space), and associated amenity spaces." Amendments sought are alterations to the approved drawings including a three-storey extension to the side of Block 2; insertion of a new lift to Block 2 and subsequent alterations to the internal layout of flats 1, 2 and 6 and associated fenestration.' Amendments to include: enclosing of 2no approved car parking spaces with mansard roof garage, enclosing of approved bin storage and provision of 2no enclosed cycle parking.

Non-material amendment to planning permission ref: 2019/02756/VAR granted 6th January 2020 for the 'Variation of Condition 2 (approved drawings) of planning permission reference: 2016/02771/FUL dated 15/05/2019 for the "Removal of the existing advertisement hoarding to the front of the site, and demolition of the existing retail storage (Class A1) and car wash buildings (Sui generis) to the rear, and redevelopment of the site to include the erection of a three storey building on the Lillie Road frontage, to provide 2 no. retail units (Class A1) at ground floor and 6no. self-contained flats (2 x studio and 4 x 2 bed) at first and second floor levels, and the erection of a three storey building to the rear of the site to provide 3no. self-contained flats (3 x 2 bed), together with 3 no. off-street car parking spaces (including 1 disabled space), and associated amenity spaces." Amendments sought are alterations to the approved drawings including a three-storey extension to the side of Block 2; insertion of a new lift to Block 2 and subsequent alterations to the internal layout of flats 1, 2 and 6 and associated fenestration' to allow amendments to the description of development to read as follows 'Removal of the existing advertisement hoarding to the front of the site, and demolition of the existing retail storage (Class A1) and car wash buildings (Sui generis) to the rear, and redevelopment of the site to include the erection a mixed use development to provide retail units (Class A1) at ground floor and residential development at the upper levels of the development, together with 3 no. off-street car parking spaces (including 1 disabled space), and associated amenity spaces.'

Non-material amendment to planning permission ref: 2019/02030/FUL granted 14th October 2019 for the 'Change of use of rear part of the ground floor from retail (Class A1) into residential (Class C3); erection of a single storey rear extension to the side of the existing back addition following partial demolition of the single storey back addition; excavation of the side and rear gardens to form lightwells in connection with the creation of a new basement; installation of new windows and doors to the side of single storey back addition; use of the basement and rear part of ground floor as 1 x 2 bedroom self-contained flat.' Amendments to include omission of the basement extension, change of use of rear part of the ground floor from retail (Class A1) into 1 x 1 bedroom self-contained flat (Class C3).