1. 2 x Birches in centre of grass - fell and remove. 2. Hornbeam by house - reduce branches overhanging house by 4 m and raise crown up to 5 metres. 3. Gingo Bilboa - Fell and remove as it is crowded by other trees. 4. Liquidamber by garage - remove branch overhanging garage and lift lower branches to approx 4 metres. 5. Remove dead pine next to field gate. 6. 3 x beech, 2 x prunus avian, 1 x Holm Oak, 1 x Sycamore, 1 x Poplar, 1 x Oak, 1 x Maple. -Raise crowns to 5 metres on trees along field boundary. 7. 2 x birches behind garage - lift crown by 5 m and tidy. 8. Fruit trees to right of garage - thin by 30%. 9. Tree (Unknown species) to right of garage - thin by 30%. 10. Weeping willow - Pollard to previous reduction points. 11. Sycamore on left hand boundary - remove lower branch.

1. Conifer - Fell to ground level The reason for the tree to be felled is that it is growing close to a boundary wall over neighbours garage and is too big for its location.

1. T1 -Oak - Reduce lateral over garage back by 2 meters to suitable growth points - Finishing length 4 meters - Lift over highway to 6 meters not removing any major limbs - Removal of epicormic growth on lower trunk 2. T2 & T3 - Oaks - Lift over highway to 6 meters not removing any major limbs - Removal of epicormic growth on lower trunk 3. T4 - Oak - Selective reduction to lower the sail area due to fungal decay by 2 meters - Finishing height 8 meters and spread 7 meters - Lift over highway to 6 meters not removing any major limbs These works are proposed due to encroachment over structures and highways. Gaining statutory clearances over footpaths / highways, maintaining safe boundary trees to the public and road users

Approval of Conditions 3- external materials- 4- Construction Method Statement- 5- Tree Protection- 6- Landscaping- and 7- Ecological Enhancement Plan- pursuant to 21/00896/FUL Erection of a 7 bedroom dwelling and garage with associated parking, turning, landscaping, boundary treatments and private amenity space following demolition of existing 2 bedroom dwelling garage and store

1. T1 HAZEL - REDUCE CANOPY SPREAD AND HEIGHT BY UP TO 3M ALL ROUND 2. T2 HAZEL - REDUCE CANOPY SPREAD AND HEIGHT BY UP TO 2M ALL ROUND 3. T3 HAZEL - REDUCE CANOPY SPREAD AND HEIGHT BY UP TO 3M ALL ROUND 4. T4 CONIFER - SITUATED IMMEDIATELY ADJACENT TO GARAGE AND REAR GARDEN WALL - FELL TO GROUND LEVEL 5. G1 CONIFERS (6no APPROX IN A ROW INCLUDING THREE ON NEIGHBOURS SIDE OF BOUNDARY FENCE) - FELL TO GROUND LEVEL 6. G2 CONIFERS - ROW OF CONIFERS RUNNING FROM HOUSE ALONG DRIVEWAY - FELL TO GROUND LEVEL 7. G3 CONIFERS - ROW OF CONIFERS ON SIDE OF GARDEN - FELL TO GROUND LEVEL

Birch Tree (T1) - Branch to be cut back to the boundary of the property due to growing horizontally causing dangerous overhanging into garden. If the branch fell it could cause risk to life, as well as significant damage to the garage, fencing, hedging and other planting in the garden.

1 - Remove epicormic regrowth from trunk of one English Oak (Quercus robor) up to canopy break at 7m to clear garage. This work is historic. 2 - Prune back neighbours Hazel, Laurel, Sweet Chestnut and Douglas fir to the boundary fence and up to 8m and clear roof and conservatory by 3m. Lift low branches to 4m from ground level from one small Copper Beech and small multi stemmed Holm Oaks near clients hot tub. 3a - Fell to 100mm above ground level one Laurel leaning into garden at base of the mature Copper Beech (Fagus sylvatica 'Atropurpurea). 3b - Carefully remove as much root bole as possible, without causing damage to surrounding objects tree roots etc, by stump grinding to a depth of 150mm below ground level, no lateral roots will be removed unless specified. 4a - Fell to 100mm above ground level one Mountain Ash (Sorbus aucuparia) in front of children's play equipment to allow the area to be redeveloped. 4b - Remove as much root bole as possible, without causing damage to surrounding objects by stump grinding to a depth of 200mm below ground level, no lateral roots will be removed unless specified, all grindings to be left on site. Trees in 2) located in neighbours property - Tinkers Furze, Gough Road, Fleet, Hants. GU51 4LL

1 - Lift low branches to 6m from ground level from one English Oak (Quercus robor) in front lawn. Remove two branches towards house and one branch towards street light and the smaller sub laterals. Work in part being undertaken to stop squirrels jumping from tree on to house roof. 2 - Lift low branches to 7m from ground level from one Sweet Chestnut (Castanea sativa) and shorten back to give 3m clearance from corner of house. Again work in part being undertaken to stop squirrels jumping from tree on to house roof. 3 - Lift low branches from three (3) Beech by side of garage to give 3m over roof. Again work in part being undertaken to stop squirrels jumping from tree on to garage roof and then house roof. 4 - Lift low branches to 6m from ground level from one Sweet Chestnut (Castanea sativa) on boundary to right of facing house.

Application to remove Sycamore trees (T1, T2, T3 and T4). The branches of all trees are coming into contact with the garage roof and the canopy of these trees is significantly shading our and our neighbours gardens. The trunk of T1 is at an angle of circa 60 degrees to the horizontal and is resting on the boundary fence and we have concerns regarding the long term stability of this tree. The concrete slab base upon which the garages sit has cracked and lifted adjacent to trees T3 and T4. The trees are not in particularly good condition.

T1 - Willow - Reduce height by 4 metres, Reduce lowest branch back to previous pruning points. T2 - Ash - Reduce back to previous pruning points, Remove 2 lowest branches and reduce secondary branching to give 2 metre clearance from outbuilding roof. T3 - Silver Birch - Reduce by 3 metres back to previous pruning points and reduce by 1.5 to 2 metres off the lateral growth towards garden/house. T4 - Pear - Reduce laterals by 2 metres growing over garage and 2 metres clearance from the fabric of the house T5 - Yew - Remove T6 - Pine - Remove the smaller of the two pines T7 - Silver Birch - 4 metre reduction T8 - Rear boundary hedge - Reduce back 1.5 metres further than the previous pruning points.