1. 1 x Dead tree (T1) - Fell and grind to 200mm below ground level. 2. 1 x Walnut (T2)- Fell. 3. Line of Beech (G1)- Cut back to boundary line. 4. 1 x Copper Beech (T3)- Cut back from property line by 2m. 5. Line of Cypress (G2) - Cut back to emerging growth. 6. 1 x Dead tree (T4)- Fell. 7. Line of trees (G3) - Reduce by 1.5m in height and shape to balance.

1. Oak tree 1833 - 01/01080/HDC - the north side of the tree will be reduced by 2m back towards the boundary fence but not crossing it. the tree will be shaped as it previously was by SRA tree services, the tree is currently with in 1m of the roof of 22 greenhaven and blocking light. The re shaping of the tree will eliminate the risk of it becoming in contact with the pitch roof of 22 greenhaven.

Rear garden of clients at 138 Aldershot Road - Mrs Bassant. 1). Two Lawson Cypress (Chamaecyparis lawsoniana) on left boundary - Fell to approximately ground level 2). Two Lawson Cypress (Chamaecyparis lawsoniana) on the right boundary - Fell to approximately ground level 3). one group of mixed conifers - Lawson , Leyland and a small true Fir Abies in top left corner of garden - Fell to approximately ground level

1). Reduce one Hornbeam on left side boundary by approximately 6 metres to a final height of approximately 6 metres and a finished radius of approximately 2 metres to suitable live secondary growth to allow in light for the photovoltaic panels on the roof. 2). Reduce height of one Beech next to summerhouse by approximately 4 metres - to a final height of approximately 10 metres and a finished radius of approximately 2-3 metres - pruning to suitable live secondary growth. 3). Reduce and reshape to previous reduction points retaining smaller growth at reduction points for shape one mature Beech. Reducing by approximately 3 to 4 metres, leaving a finish height of approximately 15 metres and a finished radius of approximately 3 metres. 4). Fell to approximately ground level triple stemmed suppressed leaning Beech on rear boundary. 5). Shorten back branches by approximately 2.5 metres giving a finish radius of approximately 4 metres to rear of house from one mature Beech back to previous reduction points, reducing . back approximately five longer branches. Remove one long limb over summerhouse approximately 20 cm in diameter from the Beech. The tree is in joint ownership between the client and owner of 41 Elvetham Road. The shortening back from the client property is part of the tree owned by the client. The removal of the limb over the summerhouse would require the consent of the owner at the adjacent property at 41 Elvetham Road.

1. 2 x Birches in centre of grass - fell and remove. 2. Hornbeam by house - reduce branches overhanging house by 4 m and raise crown up to 5 metres. 3. Gingo Bilboa - Fell and remove as it is crowded by other trees. 4. Liquidamber by garage - remove branch overhanging garage and lift lower branches to approx 4 metres. 5. Remove dead pine next to field gate. 6. 3 x beech, 2 x prunus avian, 1 x Holm Oak, 1 x Sycamore, 1 x Poplar, 1 x Oak, 1 x Maple. -Raise crowns to 5 metres on trees along field boundary. 7. 2 x birches behind garage - lift crown by 5 m and tidy. 8. Fruit trees to right of garage - thin by 30%. 9. Tree (Unknown species) to right of garage - thin by 30%. 10. Weeping willow - Pollard to previous reduction points. 11. Sycamore on left hand boundary - remove lower branch.

1. Lime (T1) - Trees are overhanging garden and dropping debris onto hot tub area, Prune back to boundary line using suitable growth points 2. Lime (T2) - Trees are overhanging garden and dropping debris onto hot tub area, Prune back to boundary line using suitable growth points

Yew (T1) - Prune back to boundary line, using good growth points to help maintain health of the tree.

1. T1 Beech- reduce over extended branches by 2 m , that are over-hanging rear boundary, to relieve stress on these limbs & allow more light to under-story plants

1. T1 Holly - Reduce height of Holly on right boundary under canopy of Beech tree by approximately 2 metres 2. T2 & T3 Holly and Suppressed Beech Reduce height Holly in bottom right corner by approximately 4 metres and reduce previously reduced Beech to the rear by a further 1.5 to 2 metres to suitable live secondary growth. 3. T4 Reduce height of suppressed Beech growing through canopy of mature Western Red Cedar to approximately 3 metres retaining the low growth as screening to help to re-create a hedge.

1. Ash tree (front left side boundary)- shape back and lift canopy to provide 2.5metres clearance from structure of adjacent building, to abate a nuisance.