Tree 2: Whitebeam (TPO) - Remove the lowest limb over the garden shed (North) Works are to increase light into the property and reduce debris on the roof and driveway.

1. Re-Pollard one mature Lime to previous old pollard points approximately level with owner of trees apex of house roof to reduce possibility of limb/stem failure in the future. Shorten back side branches primarily over neighbours side to approximately 2 metres from the main trunk. Lift low canopy of to give approximately 3 metres clearance over clients sheds in rear garden of 3 Clarence Road, pruning to suitable live secondary growth.

Demolition of exiting ground floor kitchen, bathroom and shed and erection of a single storey rear extension, conversion of loft into habitable accommodation, replacement of roof on first floor bathroom and new bathroom window on first floor.

1. 2 x Leyland Cypress (T1 and T2) - Fell The trees are part of the boundary hedge between our house (No. 3) and our neighbours at No. 4. It is very close to both houses (actually overhanging our house) and very large. They are simply oppressive to both properties. The larger tree is already crushing our shed and making it unusable and, with age, branches have started to fall in high winds onto our roof.

Erection of a single storey side and rear extension, hip to gable roof extension, insertion of rooflight to front and erection dormer window to the rear to facilitate the conversion of the loft to habitable accommodation, insertion of window to ground floor side, alteration of position of window to first floor side and removal of shed

T1+T2 - Pine - lift by 1m to gain 1m clearance from shed roof G1 - Lift by 1.5 - 2m to gain 3.5m Clearnance from driveway T3 - Tree has fallen and is leaning on fence. Tree is essentially being removed but if they need a measurement then 3m T4 Conifer - 2m lift to gain 4m Clarence from road T5 - Remove stake and tie from tree before it causes damage to stem, next to parking space 25 T6 - Rowan - 1m prune away from building to gain 1m Clarence G2 - Oak -Deadwood + 1-3m reduction of selective limbs to gain at least a 1m Clarence from building G2 - Holly/mixed hedging - holly hedge - Prune back by 1m and reduce in height by 2m T7 - Oak - Deadwood T8 - Oak - Deadwood G3 - Prune back branches that are growing into the grass area of garden. T10 - Norway maple - reduce by 2m

Erection of a two storey rear extension, replacement of flat roof with pitched roof, removal of shed, conversion of garage to habitable accommodation, replacement of window to ground floor side with bi-fold doors and insertion of window to first floor side

T8 - 1 x Oak by Shed - Reduce limbs overhanging the roof by up to 4m

Group A - Conifers - Crown lift on the South side of trees to establish a 1m clearance of the apex of the shed roof. Tree 1 - Conifer - Remove broken stem leaning on patio fencing. Tree 2 - Holly - Reduce in height to 2m and shape sides to balance. Tree 3 - Hazel - Coppice Tree 4 - Hazel - Remove lateral stems growing over stream.

two Beech (Fagus sylvatica) - Cut back two branches pruning back to 2.5 m from the rear boundary fence i.e. the apex of the shed roof parallel to the rear fence line. This will leave a finished radius of 3.5 and 4.5 metres. Pruning back to suitable live secondary growth.