1. Ash tree (on boundary fence) - Remove one substantial limb and two smaller side lateral limbs overhanging greenhouse and shed before any damage is caused. Work to be carried out by Cederdale. See attached; ref1 - schedule of works ref2 - plan showing position of tree ref3 - aerial photo of garden illustrating position of tree and relevant boundary line ref4 & ref5 - photographs of tree

1. T1 Alder - Coppice to fence height. 45 degree lean 2. T2 Larch - Remove 3 lowest branches. Touching Hartfield 3. T3 Oak - Crown lift over shed to leave 2 m clearance. Small branches

Approval of Condition 4- tree protection- pursuant to 21/01175/HOU Conversion of garage into habitable accommodation to include the replacement of the garage door with two windows and double door, block up two windows on the west elevation. New pergola/barbeque area with fence and a new brick wall to the west face of the barbecue. Replacement shed and enlargement of rear patio.

T1+T2 - Pine - lift by 1m to gain 1m clearance from shed roof G1 - Lift by 1.5 - 2m to gain 3.5m Clearnance from driveway T3 - Tree has fallen and is leaning on fence. Tree is essentially being removed but if they need a measurement then 3m T4 Conifer - 2m lift to gain 4m Clarence from road T5 - Remove stake and tie from tree before it causes damage to stem, next to parking space 25 T6 - Rowan - 1m prune away from building to gain 1m Clarence G2 - Oak -Deadwood + 1-3m reduction of selective limbs to gain at least a 1m Clarence from building G2 - Holly/mixed hedging - holly hedge - Prune back by 1m and reduce in height by 2m T7 - Oak - Deadwood T8 - Oak - Deadwood G3 - Prune back branches that are growing into the grass area of garden. T10 - Norway maple - reduce by 2m

Group A - Conifers - Crown lift on the South side of trees to establish a 1m clearance of the apex of the shed roof. Tree 1 - Conifer - Remove broken stem leaning on patio fencing. Tree 2 - Holly - Reduce in height to 2m and shape sides to balance. Tree 3 - Hazel - Coppice Tree 4 - Hazel - Remove lateral stems growing over stream.

two Beech (Fagus sylvatica) - Cut back two branches pruning back to 2.5 m from the rear boundary fence i.e. the apex of the shed roof parallel to the rear fence line. This will leave a finished radius of 3.5 and 4.5 metres. Pruning back to suitable live secondary growth.