Oak tree (No 1) - Reduce branch overhanging No. 2 The spinney by up to 20 metres. Oak tree (No 2) - Reduce branch overhanging No. 4 Merrivale to give a 2 m clearance from roof 3 x fir trees (No 3, 4 & 5) - Reduce branches overhanging No. 4 Merrivale to give a 2 m clearance from roof

Horse chestnut (C10) -a. Remove lowest lateral branch on the East side, adjacent to neighbouring property, to the main stem. b. Crown lift on the southeast side, to the apex of the roof, removing secondary growth only. c. Reduce lateral on the East side, to previous points, approx. 2m

1. T757 - tip reduce branches overhanging building by up to 4m to give 2m clearance from roof and building. This tree is in decline and the proposed work will take the branches back to healthy wood to give chance of healthy regeneration. Additionally this work will prevent damage from failing branches damaging roof and give more light to building and hence prevent damp. 2. T3428 - Tip reduce branches overhanging garden back to boundary c.3m. To relieve excessive shading.

Prune Sycamore to give approximately 4 metres clearance from house leaving a final radius of approximately 3.5 metres and pruning up to approximately 2 metres above apex of roof pruning to suitable live secondary growth. Lift low branches to approximately 6 metres from ground level over clients garden only by removal of small branches up to approximately 10cm maximum diameter

1) Common Beech tree (T1) - Crown lift over the roof of the carport to 1m clearance from the apex of the roof. 2) Sweet Chestnut tree (T2) - Crown lift to provide 5.2m clearance from the ground level.

1. Large Oak Tree (rear garden) - Fell The tree has grown over the roof of the property and starting to cause damage to the roof from debris and branches dropping. The application is for complete removal of the tree. There are two oak trees growing in close proximity to the tree in the application. These trees would benefit from the removal of the tree and as they are in better location and size not to damage property. The contractor to complete works is still to be decided but is likely to be 1st call tree services or another approved contractor with knowledge and experience to remove a large tree in a difficult location. Work will be completed out of nesting season and at time at which the contractor agrees is best.

1. T1. Tag #4206, Oak - fell 3rd stem and undertake deadwood removal to the remaining 2 healthy stems Tree comprises 2 healthy stems of 400mm+ dia, and a 3rd stem of 200-250mm. The 3rd stem has a very sparse crown showing signs of major die back and evidence of decay at a height of approximately 4 metres within the main stem. 2. T2. Tag #4207, Mature twin stemmed Oak - Undertake deadwood removal only. 3. T3. Tag#4208 Mature Scots Pine - Undertake deadwood removal only 4. T4. Tag# 4209 Semi mature Oak - Fell approximately 300mm dia, tree is being shaded by more mature trees resulting in a thin crown and noticeable lean, root system is causing damage to fence posts. tree has little amenity or habitat value; fell tree. 5. T5. Tag# 4210, Mature twin Stemmed Oak -lift crown by 4 metres and reduce crown by 3 -4 metres. deadwood to be removed during reduction works. Tree has thick low hanging canopy, impeding use of the private garden and likely to make contact with dwelling in 2 -3 years that may result in damage to a roof.

T1 - Beech - Lift canopy to give 3-4m clearance T2 - Oak - Lift canopy to give 3-4m clearance T3 - Oak - Fell T4 - Oak - Lift the canopy to allow 2-3m clearance from garage roof

1. Oak tree 1833 - 01/01080/HDC - the north side of the tree will be reduced by 2m back towards the boundary fence but not crossing it. the tree will be shaped as it previously was by SRA tree services, the tree is currently with in 1m of the roof of 22 greenhaven and blocking light. The re shaping of the tree will eliminate the risk of it becoming in contact with the pitch roof of 22 greenhaven.

1. 145a - mixed group - cut back cotoneaster to give 1.5 clearance of garage, sever ivy on honey locust - To abate a nuisance, rubbing lateral branches on garage roof. 2. 146a - oak - remove a 1m section of ivy from ground level using hand tools only - To enable clear future inspection of main stem. 3. 149c - Scots Pine - remove deadwood 25mm and greater over site only - To reduce the volume of debris, mess and damage caused by falling deadwood over the target area and reduce risk of injury. 4. 151 - beech - reduce height by 3-4m reduce lateral branches by 2.5-3m to shape, remove deadwood Carry out climbing inspection of unions. - Reduction to suitable growth points to promote new growth and to improve vitality. 5. 153 - lime - remove deadwood 25mm and greater in diameter, remove epicormic growth to height of 8m To reduce the volume of debris, mess and damage caused by falling deadwood improve light to the ground floor apartments. 6. 154 - lime - remove deadwood 25mm and greater in diameter, and hanging branch at 16m northeast side of crown remove epicormic growth to height of 8m. 7. 155 - lime - remove deadwood 25mm and greater in diameter, and hanging branch at 16m northeast side of crown remove epicormic growth to height of 8m. 8. 156 - lime - remove deadwood 25mm and greater in diameter, and hanging branch at 16m northeast side of crown remove epicormic growth to height of 8m. 9. 157 - lime - remove deadwood 25mm and greater in diameter, and hanging branch at 16m northeast side of crown remove epicormic growth to height of 8m, remove ivy from main stem. Removal of epicormic growth To reduce the volume of debris, mess and damage caused by falling deadwood over the target area and reduce risk of injury. To improve light to the ground floor apartments. 10. 162 - Tulip - Crown Lift To A Height Of 3m From Ground Levelimprove light to the ground floor apartments. - To give sufficient height clearance over the lawn and seating area of the site.