1. beech - Reduce side by between 1-2 meters away from house.

Prune Sycamore to give approximately 4 metres clearance from house leaving a final radius of approximately 3.5 metres and pruning up to approximately 2 metres above apex of roof pruning to suitable live secondary growth. Lift low branches to approximately 6 metres from ground level over clients garden only by removal of small branches up to approximately 10cm maximum diameter

1. Tree 1: Oak - Reduce 4 higher over-extended limbs by 3-4 meters to secondary growth points leaving retained branch lengths of approximately 6 meters. 2. Trees 1 & 2: Oaks - Remove 10-12 small diameter low limbs extending over the house and driveway (see annotated picture). 3. Tree 3: Oak - Remove low epicormic growth over the driveway to a height of approximately 6 meters.

1. Oak (T2 within the TPO HDC 341) - Reduce the extended low limb which overhangs the house to the North by 1.5 - 2 metres and the extended limb to the West by 1.5 - 2 metres.

1. 13538 - Sweet Chestnut - Fell . severe damage to the core, tree overhanging neighbouring property. The tree congested with other tree varieties. 2. 13534 - Locust Tree - Fell. growing too close to house and hugely overgrown for the location. 3. 6 x trees - remove deadwood. Became too large for location. 4. 3 x Sweet Chestnut (red dots on plan) - Crown lift to 6 m from ground level and remove deadwood. Trees will be felled inside the garden of my property. Proposal for planting replacement trees. I will not be replanting trees in order to get more sunlight into the property and reduce the use of electricity. Currently the whole garden, including the house is in the shade due to the number of overgrown trees.

1. T1 Oak (Yaterley Common) - Remove lower limbs to trunk and remove other laterial braches growing towards house to provide clearance. 2. T2 Oak (Yaterley Common)- Remove lower two branches. 3.T3 Sweet Chestnut - Pollard to previous reduction points.

1 10 x Beech - Lift low canopy to approximately 9 m approximately 1.5 m above the height of the ridge tiles - only pruning branches on house side, retaining side lateral growth for screening.

1. 2 x Norwegian spruce (rear of the house on the left) - Fell We would like to remove these trees entirely as they move a great deal in the wind and are extremely tall. We are concerned that they may fall on the house, which is a listed building.

1. Beech Tree (T1)(tree is located in front drive way) - Fell. Tree is way to large for the location near ours and neighbours house.

1. Beech - Prune back lower branches, growing towards house to give 2 metres clearance.