1. T1 Willow - Remove the over-hanging stem to give clearance from garage roof.

T1 - Beech - Lift canopy to give 3-4m clearance T2 - Oak - Lift canopy to give 3-4m clearance T3 - Oak - Fell T4 - Oak - Lift the canopy to allow 2-3m clearance from garage roof

1. 145a - mixed group - cut back cotoneaster to give 1.5 clearance of garage, sever ivy on honey locust - To abate a nuisance, rubbing lateral branches on garage roof. 2. 146a - oak - remove a 1m section of ivy from ground level using hand tools only - To enable clear future inspection of main stem. 3. 149c - Scots Pine - remove deadwood 25mm and greater over site only - To reduce the volume of debris, mess and damage caused by falling deadwood over the target area and reduce risk of injury. 4. 151 - beech - reduce height by 3-4m reduce lateral branches by 2.5-3m to shape, remove deadwood Carry out climbing inspection of unions. - Reduction to suitable growth points to promote new growth and to improve vitality. 5. 153 - lime - remove deadwood 25mm and greater in diameter, remove epicormic growth to height of 8m To reduce the volume of debris, mess and damage caused by falling deadwood improve light to the ground floor apartments. 6. 154 - lime - remove deadwood 25mm and greater in diameter, and hanging branch at 16m northeast side of crown remove epicormic growth to height of 8m. 7. 155 - lime - remove deadwood 25mm and greater in diameter, and hanging branch at 16m northeast side of crown remove epicormic growth to height of 8m. 8. 156 - lime - remove deadwood 25mm and greater in diameter, and hanging branch at 16m northeast side of crown remove epicormic growth to height of 8m. 9. 157 - lime - remove deadwood 25mm and greater in diameter, and hanging branch at 16m northeast side of crown remove epicormic growth to height of 8m, remove ivy from main stem. Removal of epicormic growth To reduce the volume of debris, mess and damage caused by falling deadwood over the target area and reduce risk of injury. To improve light to the ground floor apartments. 10. 162 - Tulip - Crown Lift To A Height Of 3m From Ground Levelimprove light to the ground floor apartments. - To give sufficient height clearance over the lawn and seating area of the site.

1. Scots Pine (T16 on tree survey map) - a branch overhanging a neighbouring property which is growing into their garage/annexe roof and has caused leaking damage. Tree surgeon recommended cutting branch back to existing growth point which will allow healthy growth and reduce future risk of damaging neighbouring property.

1. two x Oak Trees (24 Williams Way, Fleet, GU51 3EU) - cut back to suitable growth points by 1.5 to 2 meters keeping tree as balanced as possible. Overhang the garage / and almost touch property of 7 Kenwith Ave GU51 3EX. This is creating a number of problems. One, squirrels have easy access to roof of property which can cause potential damage when roaming across house roof. Two, the garage below is a functioning massage business, so the dropping of acorns is very destructive when customers are trying to relax. Also, causing a massive shadow over property.

1. Line of Beech and Oak Trees on the EAST side of the property - Crown lift lateral branches to height of the Apex of the Roof, approx 6m, between the front and rear of garage and car port only, over hanging the property back to the edge of the garage. Lateral reduction back to previous points, approx 1.5-2m

Fell large Goat willow branch overhanging garage roof belonging to 52 Harebell Close. Danger of breaking & causing damage.

T1 & T2 - Lombardy Poplars - large dead wood to be removed T3 - Oak - Fell T4 &T5 - European Beech & Common Hornbeam - crown reduction by 2-3m to prevent branch damage T6 - Scouler Willow - Crown partial reduction by 2-3m to prevent damage to building roof and guttering T7 - Crab Apple - small partial reduction by 2-3m to prevent damage to garage roof T8 - European Plum - partial crown reduction by 2-3m to reduce the size of the tree next to the house.

1 - Remove epicormic regrowth from trunk of one English Oak (Quercus robor) up to canopy break at 7m to clear garage. This work is historic. 2 - Prune back neighbours Hazel, Laurel, Sweet Chestnut and Douglas fir to the boundary fence and up to 8m and clear roof and conservatory by 3m. Lift low branches to 4m from ground level from one small Copper Beech and small multi stemmed Holm Oaks near clients hot tub. 3a - Fell to 100mm above ground level one Laurel leaning into garden at base of the mature Copper Beech (Fagus sylvatica 'Atropurpurea). 3b - Carefully remove as much root bole as possible, without causing damage to surrounding objects tree roots etc, by stump grinding to a depth of 150mm below ground level, no lateral roots will be removed unless specified. 4a - Fell to 100mm above ground level one Mountain Ash (Sorbus aucuparia) in front of children's play equipment to allow the area to be redeveloped. 4b - Remove as much root bole as possible, without causing damage to surrounding objects by stump grinding to a depth of 200mm below ground level, no lateral roots will be removed unless specified, all grindings to be left on site. Trees in 2) located in neighbours property - Tinkers Furze, Gough Road, Fleet, Hants. GU51 4LL

1 - Lift low branches to 6m from ground level from one English Oak (Quercus robor) in front lawn. Remove two branches towards house and one branch towards street light and the smaller sub laterals. Work in part being undertaken to stop squirrels jumping from tree on to house roof. 2 - Lift low branches to 7m from ground level from one Sweet Chestnut (Castanea sativa) and shorten back to give 3m clearance from corner of house. Again work in part being undertaken to stop squirrels jumping from tree on to house roof. 3 - Lift low branches from three (3) Beech by side of garage to give 3m over roof. Again work in part being undertaken to stop squirrels jumping from tree on to garage roof and then house roof. 4 - Lift low branches to 6m from ground level from one Sweet Chestnut (Castanea sativa) on boundary to right of facing house.