T1: Oak at rear of garden:remove epicormic shoots within crown, remove 5-6 minor branches from main scaffold over lawn, these are max 50m diameter branches. Reason: to keep the tree looking tidy, reduce debris shed onto the lawn and allow more light through to the lawn

T1 Ash at driveway entrance: Reduce laterally to edge of driveway and reduce height by 2m to improve access and maintain at current size T2 Multi-stemmed Ash close to garage: Reduce laterally to edge of driveway to improve access and clear front of house and garage G1 Line of Ash and Elder overhanging rear boundary: Reduce laterally to fence line to clear rear of house and garage T3 Leylandii next to summerhouse in back garden: fell to ground level. Tree has outgrown it's location and may shed branches onto summerhouse and footpath at rear T4 & T5 Norway Maple: fell to ground level to allow space for additional garden planting

Willow - Fell - Roots causing damage to shed, branches hanging over neighbour's garden, grass won't grow

00/86 T14 Lime Tree - Fell tree Rotten tree, already has large branches falling on to shed and in to garden Very near house, shed and sun room and is likely to fall down in the near future.

G1 - Variegated maple and hawthorn - Crown Lift to provide 4 metres clearance from ground level. T2 -Willow leafed pear - Crown Reduction - Reducing the height and spread of the tree by up to 1 metre, also crown lift. T3 - Holly - Crown Lift to provide 3 metres clearance from ground level. T4- Large Oak -Crown Lift to provide 3 metres clearance from ground level, removing only secondary growth and avoid pruning cuts on the main stem. T5 - Dead Pear - Fell. T6 - Large Apple - Remove major deadwood throughout whole crown area (Deadwood > 25mm in diameter). T7- Ash - Remove major deadwood throughout whole crown area (Deadwood > 25mm in diameter). T8 - Walnut - Laterally reduce the overextended lower limbs by approx 2m. T9 -Dead Plum Fell. G2 - Tennis court area - Prune and trim back all overhanging branches and hedging to the tennis court area. T11 - Holly by shed - Fell.

Group of Field Maple trees (G1) Re-pollard, back to previous cuts (2m), to allow more light into garden. Sycamore (T1) Reduce Sycamore by no more than 2m to re-balance crown and allow more light into the garden. Ash (T2 + T3) Remove 2 Ash trees to ground level as it is planted too close to its neighbouring trees. By doing so it will allow more light into the garden and also allow more light to the other trees. Trees are not worthy of a TPO and the remaining trees will benefit significantly from their removal. Hawthorn (T4) Reduce Hawthorn by no more than 3m to allow more light into garden and to make it more aesthetically pleasing. Ash (T5) Remove overweight limb from Ash over garden to allow more light into the garden. Ash (T6) Remove branch over shed, to allow more light into garden. The tree is in the neighbouring garden but overhangs.

T1 Copper Beech: 18 metres - the intention is to reduce the wind resistance and I would not expect a reduction of more than 1.8 metres at any point, except for the removal of branches that have shed their bark and these dead branches are all within the bulk of the tree. T2 Copper Beech: 10 - 11 metres - I would not expect the crown to be reduced by more than 1 metre. Our main aim is to reduce the dominance of the western aspect and possibly to remove a damaged lower limb and to preserve the Wisteria growing through the branches. T3 Silver Birch: 8 metres - necessary maintenance to contain the tree to a sensible size as situated between two houses and adjacent to a neighbouring driveway. A reduction of no more than 1 metre. No established limbs will be removed.

Replacement of a shed with a larger garden room and the construction of a play/tree house.

T1 - Ash, removal to allow more space for neighbouring poplar to grow T2 - Ash, reduction of damaged limb (by 2 Meters) growing out towards owners garden shed. Thin by 20% and lift to give 5m clearance from ground level. T3 - Prunus, removal of hanging limb above neighbours garden, Crown raise by 3M and thin by 30%

T1. Lawsons Cypress - crown lift and reduce height by 2m. T2. Lawsons cypress - prune to clear adjacent building by 1m and reduce height by 2.5m. T2a. Lawsons cypress - prune to clear adjacent building by 1m. T3. Lawsons cypress - prune to clear adjacent building by 1m. T4. Lawsons cypress - crown lift 2m (to top of wall), prune to clear pan tile roof of shed by 0.5m and reduce height by 2.5m. T5 & 6. 2no Lawsons cypress - crown lift by an additional 0.5-1m, remove dead pegs and reduce height by 2m. Prune to clear poly tunnel by 0.5m. T7. Lawsons cypress - crown lift to top of wall, reduce height by 2.5m.