T1 x Contorted Willow on left hand boundary in neighbouring rear garden, overhanging the building - Cut back to boundaries and reshape. (The tree is 7m tall and 5m wide. After cutting the tree will be 5m tall and 3m wide. 1m is to be taken off the north, east, south and west sides).

T1 Gleditsia on left boundary, adjacent to kitchen - Prune lowest, 50mm diameter, branch (west) back to union with parent branch.

T1 Oak in the front garden close to the right hand boundary (20m in height x 6m crown spread) - Reduce in height by approximately 2m. Reduce lateral branches overhanging the garage by approximately 3m.

T1 Plane - Cut back overhang to boundary. T2 Plane - Cut back overhang to boundary.

T1 Betula pendula (Silver birch) on rear right boundary - Reduce in height by approximately 1.5m from 12m down to 10.5m and average radial spread by approximately 1.5m from 8.5m to 7m. Remove major deadwood. T2 Sorbus aucuparia (Rowan) on rear left boundary - Reduce in height by approximately 1m from 7m down to 6m and average radial spread by 1m from 4.5m to 3.5m. T3 Eucalyptus globulus (Tasmanian blue gum) on rear right boundary - Reduce in height by approximately 1.5m from 7m down to 5.5m. T4 Betula pendula (Silver birch) in front garden - Prune to provide the telephone wires with .5m clearance, all pruning cuts to be limited to smaller secondary branches.

T2 Taxus baccata (English Yew) on rear right boundary - Reduce clients side back to provide a minimum of 1.5m clearance from the building. T3 Acer pseudoplatanus (European Sycamore) in rear garden, adjacent to T2 - Cut back the low to mid crown from the building to provide a 2m clearance, removing no more than 1.5m from 3m to 1.5m.

T1 Lime on front boundary - Reduce the overall height by 1m to below previous reduction points (approximately 5m in overall height) and all side (radial) laterals back to original pollard points, maintaining where possible a natural shape. Remove major deadwood, trunk growth and cut back secondary growth touching the building back to main scaffolds where possible. T2 Pittosporum Tenuifolium on front boundary - Reduce the overall height and radial spread of the canopy by up to 3m, cutting back to appropriate growing points where possible. Crown lift the lower canopy to approximately 2m above ground level overhanging the public pathway.

T1 Morus nigra (Black mulberry) on rear right boundary - Sensitively reduce in height and average radial spread by approximately 1m from 9m down to 8m and average radial spread by 1.5m from 8m to 6.5m. Raise low crown to provide 2m clearance from ground level. Remove major deadwood. T2 Tilia cordata (Small leaved lime) on rear right boundary adjacent to T1 - Dismantle in sections to as close to ground level.

Row of Conifers and Laurel in the middle - Remove the branches approximately 2m in length, overhanging the boundary onto the house at 4 Felix Manor.

T1 Tulip Tree in front garden - Reduce the overall height by up to 1.5m and reduce lateral branches by up to 1m. Thin overall canopy by up to 10%. Crown lift lower canopy over pavement to give a clearance of 2.5m from ground level. T2 Laburnum on right hand boundary in rear garden next to house - Reduce the overall canopy by up to 2m and shape accordingly.