T1. Ash (rear of Hill Brow) - Carefully climb and dismantle to as close to ground level as possible using ropes and lowering equipment as necessary and treat stump to inhibit regrowth 20x11m Tree subsidence to adjacent building T3. Cedar (front of Woodleigh) - Remove major deadwood greater than 20mm diameter, raise crown to provide 5 metres clearance from ground level and reduce encroachment towards building by 1 metre 18x14m down to 18x13m encroaching on building blocking light in to flats T4. Scots Pine (front of Woodleigh) - Reduce encroachment towards building by 1 metre and blend round so not to create a flat lane building side 18x10m down to 18x9m encroaching on building blocking light in to flats T5. Sugar Maple (between Hill Brow and Woodleigh) - Crown Reduction. Reducing the height and spread of the tree by up to 4 metres and raise crown to provide 5 metres clearance from ground level. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 20x16m down to 16x12m encroaching on building blocking light in to flats T6. Lime x 3 (front of Highcroft) - Crown Lift to provide 6 metres clearance from ground level, remove major deadwood greater than 20mm in diameter and crown thin by 10% 18x12m trees works to allow through and under in to adjacent flats T7. Acacia (front LHS of Highcroft) - Reduce encroachment towards building by 2 metres and remove major deadwood greater than 20mm in diameter 16x8m down to 16x6m encroaching on building blocking light in to flats T8. Acacia x 2 (front of Highcroft) adjacent to lamp post - Remove major deadwood greater than 20mm diameter and raise crown to provide 5 metres clearance from ground level 18x10m trees works to clear street lamp