Conservation Area Notification : One large Eucalyptus tree removal down to a stump. Stump left in ground at approximate height of 500mm. Removal is safest option for the safekeeping neighbouring Manor House. The tree has grown on an elevated section of ground with a retaining wall wall close by the trunk, leading to increased instability. Replanting is not considered necessary.

Conservation Area Application : Removal of 6no. conifer trees lining part of the drive situated next to the house. The Conifers have started to snap out at a point where they have been topped a long time ago.

Conservation area notification to pollard a group of three Sycamore (G1) back to previous established cut levels - 7m from ground level. Carry out works to Ash tree to remove dead wood, hanging branches, reshape and reduce lateral spread towards the house by 2m.

Conservation area notification to prune one Sycamore (T1) and one Ash (T2) back to provide 3m clearance from the house and crown lift three Sycamore (T3, T4 and T5) to 8m when measured from the base of the tree.

Conservation area notification: Medium sized ash tree on SBC land across the path from our front lawn and leaning towards the house. Reduce the tree by 30% to maintain its overall shape, but checking the growth towards the house.

Conservation Area Notification to prune One Yew Tree. Yew Tree reduction in height by 4 metres into secondary canopy improve shape. Final height 5 metres, final radial spread 2 metres. Also, to Raise crown of One Walnut Tree to 4m from ground level. Radial reduction of one limb (westerly facing towards house) up to 2 metres. Final tree height 10 metres (unchanged), final radial spread 4.5 meters.

Conservation Area Notification: To Fell One Contorted Willow Tree (T1) 2m from house and Replant One Flowering Cherry Tree.

Conservation Area Notification to Remove/Fell One Birch Tree 12-15m high and 2m from house.

Conservation Area Notification: to reduce the One Copper Beech Tree by 20% due to it overshadowing a neighbouring house and the tree requires pruning to keep it in the best condition. The current details Height 17m, Crown dimensions, North 7m, South 8m, West 5m and East 7m. Final Dimensions of Tree Height 13.6m. Crown dimensions - North 5.6m, South 6.4m, West 4m, East 5.6m.

Conservation Area notification: T1 - To sectionally fell to ground level Sycamore tree on drive with hole in the base going into root plate T2 - To cut 4 - 6 Pine tree lateral branches back by 3-4 metres overhanging roof on front boundary near house. T3 - To crown lift Sycamore tree under Pine tree to a height of 4-5 metres on front boundary near house for vehicular access and access of lane for high sided vehicles. T4 - To crown lift Nordman Fir tree to a height of 4 metres on front boundary for vehicular access and access of lane for high sided vehicles. G1 - To crown lift group of 4 Sycamore trees at entrance to driveway to 4 metres in height for vehicular access and access of lane for high sided vehicles.