Conservation Area Notification : T1 Ash Tree, This tree is on the top of a bank growing over the nursery building, the tree has over weighted limbs extending over the roof. Proposal to Pollard the tree to leave limbs at 2 Metres from the main stem.

Conservation Area Application : T1 - To crown reduce Apple tree to previous points (maximum 1 metre in both height and lateral spread) and shape on rear side boundary leaving a 2 metre by 4 metre parasol crown - annual pruning. T2 - To prune and shape Apple trees opposite in rear garden by a maximum of 30 cms in both height and lateral spread leaving a 1 metre by 3 metre crown - annual pruning. T3 - To cut neighbours overhanging Fig tree back to boundary by a maximum of 2 metres laterally and away from garage roof in rear garden. T4 - To cut back Holly tree growing into neighbours garden by a maximum of 2 metres in lateral spread and shape in rear garden leaving a 3 metre tall by 2 metre pear shaped crown.

Conservation area notification to reduce one Ash and one Fir by 15-20% leaving the trees 10m in heght and approvimately 5m spread. Cutting limbs overhanging the neighbouring property back beyond the roof line boundary.

Conservation area notification: Reduce two Cypress trees to height of 3m; Reduce one Cypress tree to height of 2.5m; Crown lift one Group of Horse Chestnut trees and one Ash tree to 3.6m height above ground level; Line of various trees within mixed hedgerow - prune back branches growing towards and over roof by 2.5m in length (final radial spread, 1m from main stem).

TPO Application to Remove One Eucalyptus tree due to tree causing damage to property's roof and guttering.

Conservation Area notification: T1 - To sectionally fell to ground level Sycamore tree on drive with hole in the base going into root plate T2 - To cut 4 - 6 Pine tree lateral branches back by 3-4 metres overhanging roof on front boundary near house. T3 - To crown lift Sycamore tree under Pine tree to a height of 4-5 metres on front boundary near house for vehicular access and access of lane for high sided vehicles. T4 - To crown lift Nordman Fir tree to a height of 4 metres on front boundary for vehicular access and access of lane for high sided vehicles. G1 - To crown lift group of 4 Sycamore trees at entrance to driveway to 4 metres in height for vehicular access and access of lane for high sided vehicles.

Conservation area notification: One Holm Oak - Prune back the branches that are encroaching on the roofline of the property to leave 2m clearance between the canopy and the roof.

Conservation area notification: T1 Sycamore - reduce height to 14m, width to 14m; T2 Sycamore - reduce height to 16m, width to 18m; T3 Sycamore - reduce height to 12m, width to 12m; T4 Hazel - Coppice; T5 Sycamore - reduce height to 14m, width to 7m - crown lift to 2m clearance off roof; T6 Sycamore - reduce height to 18m, width to 14m, crown lift to 2m clearance from roof; T8 Sycamore - reduce height to 12m, width to 8m; T9 Walnut - reduce height to 9m, width to 9m - Remove the 3 lowest branches; T10 Weeping Ash - Ash Die Back (Photo attached) - Remove; T11 Holly - reduce height to 9m; T12 Sycamore - reduce height to 16m, width to 16m; T13 Sycamore - reduce height to 7m (just below telephone lines) (Photo attached).

Conservation Area Notification for 1 x (T1) Beech tree - Pruning of tree up to 3m as required to shape it, 1 x (T2) Ginko tree - Pruning of tree up to 3m as required to shape it, pollarding branches grown over house to avoid roof and drain damage, 1 x (T3) Lime tree - Felling of dangerous tree, (T4) Holly Trees- Pruning and thinning of trees that are overgrown across property and across substation. Some felling required of smaller trees to declutter and 1 x (T5) Horse chestnut tree - Pruning of up to 3.0m across road and paths as required to shape the tree.

Conservation Area Notification for 3 x (T1, T2, T3) Lime Trees - Crown reduction to previous pollard points. 1 x (T4) Oak Tree: Removal of branches currently resting on house roof and walls as indicated on annotated photograph.