Compliance with conditions notification 20/00360/FUL ( Change of use from office use class B1a to residential class C3 to create 5 residential units, involving partial demolition of rear wing to create parking, cycle and refuse storage space and construct first floor extension.) Condition 3 - Sample of materials Condition 4 - Window drawings Condition 7 - Hard and soft landscape

Application for non-material amendment following grant of Planning Permission FUL/MAL/20/01278 (Proposed splitting of dwelling / offices to form 2 semi detached houses, conversion and extension of existing garage to form 3 bedroom detached house (following outline application 18/01035/OUT) and associated works) Amendment sought: 1. Replace garage door with double window and seal remaining entrance around. Bring floor to building regulations for a usable room / home office. 2. Increase extension to within 300mm of the existing property front face. 3. Increase extension to within 300mm of the existing property back face. 4. Replace one set of rear patio doors with window of the same width . 5. Centralise front door to achieve a symmetrical athletically front aspect with side panels 6. Reinstate existing central window (single only). 7. Extend cladding to within 1m of the floor to match the design of new properties being built on adjacent land. Remaining shall be a brick plinth.

Two storey rear extension to dwelling including installation of rooflight, larger window at ground floor, partial infilling of first floor window, ground floor openings, and construction of a single storey home office / storeroom.

Conversion of garage to office/study with a pitched roof replacing the existing flat roof. A proposed non-habitable link between garage and dwelling. Changes to fenestration.

Installation of 2No. roller shutter doors with adjacent storey height windows and the re-configuration of the internal floor layout to form two warehouses with independent first floor offices.

Two storey rear extension and alterations to dwelling including installation of rooflight and larger window at ground floor, partial infilling of first floor window and ground floor openings and construction of a single storey home office/store room.

Application for non-material amendment following grant of Planning Permission 21/00477/FUL (Use of the existing first floor offices as independent offices, not connected with the ground floor business.) Amendment sought: Changes to internal layout of building to reduce area of first office space and installation of roller shutter door with infill windows.

Compliance with conditions notification 19/00761/FUL (Variation of condition 2 on approved planning permission FUL/MAL/18/01326 (Proposed conversion from office to residential 2No. bed dwelling, balcony, alterations to fenestration, brickwall, re-surfacing and parking bays). Condition 3 - Details/samples of bricks

Change of use of first floor from office to residential to form 3 flats, using existing external windows to provide natural light to all habitable rooms.