Ash tree identified as T1 and yellow star on attached sketch plan. The Ash tree has a notable cavity which extends downwards from a previously removed branch on the South side (See Pic 2). There is a cavity (See Pic 3) at approximately 1m above ground level. The depth of this extends to approximately 50% of the stem diameter. Significant heartwood decay is also visible. The vast majority of the crown of the tree is located within the top 25% of the stem which in such an exposed location creates a significant sail effect. The immediately adjacent Ash tree has also recently failed having similar decay. This has also left this individual tree more exposed to the wind. Due to the now increased risk of this tree also failing and causing damage to outbuildings and/or fences the client wishes to remove the tree.

Retrospective application for fencing to front and rear boundary and internal fence between house and boundary

Ash tree A1: cut back canopy encroachment to viable growth points. cut back to 1.5 metres off current boundary fence to Wisteria Drive. Removal of all deadwood. Ash Tree A2: cut back canopy encroachment to viable growth points. Cut back to 2 metres off current boundary fence. Reason: tree have not been maintained and large branches continue to fall off these trees.

Request for EIA screening opinion for the proposed erection of modular security building, waste management building and extension to existing warehouse with alterations to existing car park layout, internal fencing and relocation of access

Retrospective application for retention of gravel, installation of fence to sides, erection of shed and installation of chimney to side of existing chalet, installation of CCTV and installation of grasscrete to entrance

Erection of various sections of security fencing including installation of gate

Details in discharge of conditions 6 (Construction Management Plan), 7 (Materials), Condition 8 (Lighting) and Condition 9 (Fencing) pursuant to DM/1134/21/FUL (Additional Condition added for Construction Management Plan)

Prior approval application to remove an existing 20 metre high mast and associated compound and to install a replacement base station with a 25.5 metre high tower to include 6no. antennas, 2no. 600mm dishes, 7no. equipment cabinets and associated 2.4m high compound fencing and ancillary development thereto (Clarification of Description Letter 16.10.2023).

Retrospective application for the partial removal of the existing boundary hedge, fence and gates, erection of 2 metre high fencing and gates to the side and demolition of existing detached garage

Retrospective partial change of use of land to domestic curtilage, retain existing shed and 1.9m boundary fence and retain converted garage as garden room with associated alterations